![]() |
No video on BeeBox N3150 |
Post Reply ![]() |
Page <1234> |
Author | |
Jaymz ![]() Newbie ![]() Joined: 09 Nov 2015 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
N3150 - > same problem here no signal
just mounted the ram and SSD nothing happen no UEFI nothing... suggestion ? this is my ram Crucial 2GB 1.35V/1.5V CT51264BF160B - Modulo de Memoria para Computadora Portátil DDR3 1600 MT/s (PC3-12800) CL11 SODIMM 204-Pines ASIN B005LDLP8W
|
|
![]() |
|
Luuc ![]() Newbie ![]() Joined: 24 Sep 2015 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
Hi all,
Today, I got my second Beebox N3150, but still the same problem: no video. Only a blue light when the beebox is turned on, that's all. My monitor says: no signal. I used both HDMI outputs but no signal at all. I also tried to reinstall the RAM en also tried to use just one instead of the two I planned. No difference: no signal. I use Kingston RAM: KVR16SLE11/4HB. And a 2,5 inch SSD Crucial BX100 500 Gb. Removing battery and shorten the CMOS pads didn't work out anything. No signal at all.... I feel very disappointed about this, it is still my second Beebox that has the same problem..... Anyone sugesstions what to try? |
|
![]() |
|
dwane3 ![]() Newbie ![]() Joined: 14 Oct 2015 Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
n3000,first time,install ssd and 2*2 ram,no video on both hdmi,what should I do?Please help me!Thanks.
Edited by dwane3 - 20 Oct 2015 at 10:25pm |
|
![]() |
|
itanet ![]() Newbie ![]() Joined: 21 Sep 2015 Location: italy Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
@SuperDaniel i have the 1.10 bios version (the only existing)
I have already tried to do the upgrade by downloading it from the website asrock but nothing to do ... @Grexicania I also had the same doubt of incorrect installation, I made dozens of tests but the result was always the same. after click the Rams do not go lower. are years that I assemble PCs, this certainly is not the first time ... I do not know what to do ... ![]() ![]() ![]() |
|
![]() |
|
dwane3 ![]() Newbie ![]() Joined: 14 Oct 2015 Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
Kingston, KVR16LS11S6/2 2x2 GB,compatible,who using?Thanks.
Edited by dwane3 - 15 Oct 2015 at 12:02pm |
|
![]() |
|
dwane3 ![]() Newbie ![]() Joined: 14 Oct 2015 Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
Kingston, KVR16LS11S6/2 2x2 GB,compatible for use?Thanks.
|
|
![]() |
|
Grexicania ![]() Newbie ![]() Joined: 15 Oct 2015 Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
I had the same problem.. no video. I was going to send it back but then re-seeded the RAM and it worked just fine. Even though the RAM clicked in, it needs to be pushed in all the way. None of the pins should be showing, which was my first mistake. I thought I had pushed it in all the way.
Hope this helps some of you.
|
|
![]() |
|
SuperDaniel ![]() Newbie ![]() Joined: 15 Oct 2015 Location: Germany Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
I using 2x4 GB Kingston KVR16LS11/4 without a problem
If you run it only with one ram modul, did this work, which bios version is installed on your beebox Edited by SuperDaniel - 15 Oct 2015 at 2:00am |
|
![]() |
|
itanet ![]() Newbie ![]() Joined: 21 Sep 2015 Location: italy Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
I've already checked the AVL but the Rams described therein are not easily to be purchased.
then what I read on the website kingston is false? http://www.kingston.com/it/memory/search/Default.aspx?DeviceType=21&Mfr=ASR&Line=Beebox%20Series&Model=93155&Description=Kingston_ValueRam_Memory_for_ASRock_Beebox_Series_N3150-NUC I read several reviews that use the memories that I have purchased. I would like to be sure it is not my beebox to be dead. thanks for your support. |
|
![]() |
|
ASRock Expert ![]() Newbie ![]() ![]() Joined: 04 Oct 2015 Location: Croatia Status: Offline Points: 220 |
![]() ![]() ![]() ![]() ![]() |
Check the AVL:
http://www.asrock.com/nettop/avl/Beebox%20Series.pdf
|
|
990FX Extreme 9 MOD P1.70
AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X |
|
![]() |
Post Reply ![]() |
Page <1234> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |