|
ASRock AB350M Pro4 - Freezing |
Post Reply 
|
Page <1 2223242526 34> |
| Author | |
eddie55 
Newbie 
Joined: 02 Feb 2018 Status: Offline Points: 37 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 07 Jun 2018 at 8:36pm |
 |
|
|
Jaume
Newbie
Joined: 07 Jun 2018 Location: Rasquera Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 1:49am |
Haven't tried with memtest, but Windows Memory test was able to check memory two passes without any error. Don't think is anything memory related. Lowering the RAM with the latest beta bios and underclocking CPU to 3500 hasn't helped. |
|
|
|
|
benzsport357
Newbie
Joined: 10 Apr 2018 Location: Thailand Status: Offline Points: 11 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 3:13am |
|
|
|
eddie55
Newbie
Joined: 02 Feb 2018 Status: Offline Points: 37 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 3:26am |
|
If you are sure your hardware is fine and Windows 10 doesn't work out download kubuntu
and flash it to usb and boot off of it and give it a test drive for a few hours.... maybe even run stress test but i dont know how that would run in a live image Edited by eddie55 - 08 Jun 2018 at 3:32am |
|
|
|
|
Jaume
Newbie
Joined: 07 Jun 2018 Location: Rasquera Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 5:21am |
I'm not shure the hardware is fine!  haven't tried with kubuntu, but booted with a live ubuntu USB and had lots of PCIe errors. I've tried with different boot parameters pcie_aspm=off also pci=nomsi and pci=noaer unable to boot without errors, although the desktop appears and everything seems to work. Haven't tried to stress with linux because all the PCIe errors shown in dmesg.
|
|
|
|
|
Jaume
Newbie
Joined: 07 Jun 2018 Location: Rasquera Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 5:33am |
|
|
|
eddie55
Newbie
Joined: 02 Feb 2018 Status: Offline Points: 37 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 5:35am |
|
How's the cooling in the pc.. Maybe put a fan blowing into the side of the pc.. what are the temps
|
|
|
|
|
Jaume
Newbie
Joined: 07 Jun 2018 Location: Rasquera Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 5:40am |
Have the case opened and added an additional fan blowing over chipset (was the hottest part at touch). The temps never go up 60ºC except one sensor that shows 98ºC but I suppose that is a bad mesure, because you can touch all the coolers and they are not so hot!!!
|
|
|
|
|
eddie55
Newbie
Joined: 02 Feb 2018 Status: Offline Points: 37 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 10:19am |
|
all i can say was my computer was crashing like crazy on the desktop and so far its been on for over 24 hours and there have been no problems since upgrading to the latest bios...
Possibly try a different PSU? Try removing 1 stick of ram and only using 1 in different slots.... i can tell you that none of my temps read anything that high CPU @ 32.5 Ryzen 1600X GPU @ 24 k10temp-pci-00c3
Adapter: PCI adapter temp1: +32.5°C (high = +70.0°C) amdgpu-pci-2600 Adapter: PCI adapter fan1: 1567 RPM temp1: +24.0°C (crit = +0.0°C, hyst = +0.0°C) nct6779-isa-0290 Adapter: ISA adapter Vcore: +0.34 V (min = +0.00 V, max = +1.74 V) in1: +1.30 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: +3.36 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.36 V (min = +2.98 V, max = +3.63 V) in4: +1.83 V (min = +0.00 V, max = +0.00 V) ALARM in5: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM in6: +1.37 V (min = +0.00 V, max = +0.00 V) ALARM 3VSB: +3.46 V (min = +2.98 V, max = +3.63 V) Vbat: +3.26 V (min = +2.70 V, max = +3.63 V) in9: +0.00 V (min = +0.00 V, max = +0.00 V) in10: +0.94 V (min = +0.00 V, max = +0.00 V) ALARM in11: +1.07 V (min = +0.00 V, max = +0.00 V) ALARM in12: +1.70 V (min = +0.00 V, max = +0.00 V) ALARM in13: +0.26 V (min = +0.00 V, max = +0.00 V) ALARM in14: +1.84 V (min = +0.00 V, max = +0.00 V) ALARM fan1: 1021 RPM (min = 0 RPM) fan2: 1445 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) SYSTIN: +27.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor CPUTIN: +25.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN0: +7.0°C sensor = thermistor AUXTIN1: +29.0°C sensor = thermistor AUXTIN2: +22.0°C sensor = thermistor AUXTIN3: -28.0°C sensor = thermistor PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C PCH_MCH_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled |
|
|
|
|
Jaume
Newbie
Joined: 07 Jun 2018 Location: Rasquera Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jun 2018 at 4:49pm |
In my case AUXTIN1 was near 98ºC but touching the VRM and the chipset cooler nothing was too hot so you could'nt touch. I'm waiting for a new MB to arrive today. The PSU was a brand new 500W one. I'll post if everyting works changing the motherboard. Thank you so much for your help!!
|
|
|
|
|
Post Reply
|
Page <1 2223242526 34> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
eddie55 wrote: