Taschi X399 BIOS Update Crash

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

CyberPowerPC
Fatal1ty X399 Taishi
AMD Threadripper 1950X
4 x 4GB DDR4
GeForce 1070 TI

I've had the computer for several months.  I tried to update the BIOS from 1.8 to 2.0, using the ASRock Windows 10 app.  Twice I ran it and it seem to do the update the BIOS on Windows 10 part, but when the computer rebooted, the BIOS update did not run.

I downloaded the BIOS from the ASRock site, and when the computer booted it ran about 15 seconds, stopped, and after 5 seconds started again, repeating for ever.

Dr. Debug is on 07 when it stops and both the power & reset switch were red, until I unplugged the computer, and they are now unlit.

I have done a number of motherboard BIOS updates and know that there is one part of the update when it writes it out to a boot file and when the computer reboots, it then writes it out the motherboard as firmware.

I have contacted both ASRock & CyberPowerPC technical support, but have yet to hear from them.

Any ideas?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
scjconsulting Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 04 Apr 2017 Location: Minnesota Status: Offline Points: 57	Post Options Post Reply Quote scjconsulting Report Post Thanks(0) Quote Reply Topic: Taschi X399 BIOS Update Crash Posted: 13 Mar 2018 at 4:23am
	CyberPowerPC Fatal1ty X399 Taishi AMD Threadripper 1950X 4 x 4GB DDR4 GeForce 1070 TI I've had the computer for several months. I tried to update the BIOS from 1.8 to 2.0, using the ASRock Windows 10 app. Twice I ran it and it seem to do the update the BIOS on Windows 10 part, but when the computer rebooted, the BIOS update did not run. I downloaded the BIOS from the ASRock site, and when the computer booted it ran about 15 seconds, stopped, and after 5 seconds started again, repeating for ever. Dr. Debug is on 07 when it stops and both the power & reset switch were red, until I unplugged the computer, and they are now unlit. I have done a number of motherboard BIOS updates and know that there is one part of the update when it writes it out to a boot file and when the computer reboots, it then writes it out the motherboard as firmware. I have contacted both ASRock & CyberPowerPC technical support, but have yet to hear from them. Any ideas?
	scjconsulting