X399 Asrock, where the hell is new Agesa bios!!

http://asrock.pc.cdn.bitgravity.com/BIOS/TR4/X399%20Taichi(L1.91E)ROM.zip

agesa 1.0.0.6

Edited by ssateneth - 12 May 2018 at 4:01pm

MB: X399 Taichi, UEFI L3.32
VGA: EVGA 1080 Ti FTW3
PSU: Seasonic PRIME 1300 W PLATINUM
CPU: AMD Ryzen Threadripper 2950X
MEM: 4x16GB, 3600MHz G.Skill Trident Z F4-3600C17Q-64GTZKW

SoniC wrote:

So any of you guys has noticed any magical improvements? Unfortunately I was doing tests for 2-3 hours with different settings (incl. those from RyZEN RAM Calculator newest beta) and I am still sitting on 2933 :-/ I think my TR has a crappy memory controller :-(

Did you adjust RttNom, RttWr and RttRark under Dram Timing Config - Data Bus Config in bios as per dram calculator?

Got a screen grab of RTC for your ram @ 2933 to see it's values?

Here is mine for straight XMP 3200 but I tweaked the RttNom - RttWr and RttPark in bios.

Edited by lowdog - 13 May 2018 at 5:23am

X399 Fat Pro Gaming bios 3.10 - TR4 1900X - 64GB G-SKILL TridentZ F4-3200C14Q-64GTZ @ 3133MHz - Vega 64 AIO with EK block - WC Custom loop - 1500W Silverstone PSU - yay

lowdog wrote:

This bios has NO magical improvements over 2.00 bios, seems to boot a little faster but as far as new settings or XMP improvements there are NONE as far as I can determine.
ASSRock realy need to put in some work on XMP profiles and ram compatibility/stability especially with Samsung b-die modules.

I don't agree Wink

AGESA 1.0.0.6 allowed me for the first time to use the 3200 CL14 timings on my 64GB kit.

The ONLY option that lead to earlier problems was the recommendation by Ryzen DRAM Calculator 1.1.0 beta2 to set "Memory clear" to disable. This and only this has lead to boot-loops (up to "55" and bam! internal reset to 00 and then further counting on the Dr. Debug). To get out of it you need to clear cmos... which has driven me crazy to set everything up like 20-30 times in a row.

I found it out after seeing people reaching 3200 with 4x DR (mainly your post convinced me it can be done). I thought... what the hell... the colleagues are doing it... so why can't I? And I started from my stable 2933 and changed, saved & rebooted into uefi after every change. Took me long enough but finally I am here! @3200 !

So if someone has problems -- don't touch memory clear, leave it on auto.

Btw - my mem requires to have 2T CR, thus disabling Geardown and setting CR to 2T manually. 10000% stable.

Rttpark is not disabled, it is RZQ/1

Edited by SoniC - 14 May 2018 at 4:15am

-=SoniC=-
TR x1950, ASRock X399 FPG (v. 3.33A), G.Skill 3200 CL14 64GB, Enermax LiqTech 280,
AMD Vega 64 LC, 10x HDDs (mostly Hitachi), 2x M.2 (970EVO,960Pro), Xonar DX, AX1200i PSU

This is BS! with this bios;

4 x 8GB Flare X testing - all seem stable in windows and HCI Memtest but boot up is always the problem, only 2933/3066 doesn't have boot problems.

3333MHz

3466MHz

3600MHz

X399 Fat Pro Gaming bios 3.10 - TR4 1900X - 64GB G-SKILL TridentZ F4-3200C14Q-64GTZ @ 3133MHz - Vega 64 AIO with EK block - WC Custom loop - 1500W Silverstone PSU - yay

Dear lowdog,

Greetings, this is ASRock TSD.

We provide latest BIOS L1.91E (Update ThreadRipperPI-SP3r2 1.0.0.6) on website.

Please download the BIOS from below link,

https://www.asrock.com/MB/AMD/Fatal1ty%20X399%20Professional%20Gaming/index.asp#BIOS

Thanks!

All the best,

ASRock TSD