CPU stuck at 1550MHz after OC |
Post Reply | Page 12> |
Author | |
Aurumvorax
Newbie Joined: 16 Jun 2018 Status: Offline Points: 42 |
Post Options
Thanks(0)
Posted: 27 Jul 2018 at 12:43am |
Sorry, been on vacation and wasn't able to look into this again until today.
So I updated my BIOS to 4.80. Lot of different options now in the OC-Tab. After entering my settings I noticed that they won't be accepted any longer by the system. I can enter them without problem, but the CPU won't clock higher than the default 3.3GHz. What am I missing here? |
|
Erasmus_Tycho
Newbie Joined: 20 Jan 2018 Location: Phoenix, AZ Status: Offline Points: 85 |
Post Options
Thanks(0)
|
I had the same problem, nothing I did could fix this until I updated my bios to version 4.x. Looking at the bios versions for your board, you need to install the 3.5 bios (bridge) and then install the latest bios. This should fix your multiplier bug and let you get your overclock.
|
|
ASRock x370 Taichi V4.4| Ryzen 1800x | 16GB x 2 DDR4 3200 (14cas) | GTX 1080 Ti K|NGP|N | WD NVMe Black 512GB | 2 x 500GB Samsung EVO 960 | Corsair HX1000 | EK Custom Loop (360mm rad + 280mm rad)
|
|
Aurumvorax
Newbie Joined: 16 Jun 2018 Status: Offline Points: 42 |
Post Options
Thanks(0)
|
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
agreed 99% sure its a cpu with the multi bug the cure i believe was to use offset voltage
|
|
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
Erasmus_Tycho
Newbie Joined: 20 Jan 2018 Location: Phoenix, AZ Status: Offline Points: 85 |
Post Options
Thanks(0)
|
ASRock x370 Taichi V4.4| Ryzen 1800x | 16GB x 2 DDR4 3200 (14cas) | GTX 1080 Ti K|NGP|N | WD NVMe Black 512GB | 2 x 500GB Samsung EVO 960 | Corsair HX1000 | EK Custom Loop (360mm rad + 280mm rad)
|
|
Aurumvorax
Newbie Joined: 16 Jun 2018 Status: Offline Points: 42 |
Post Options
Thanks(0)
|
Overclocking via multiplier. CnQ is disabled. Not the only one with this problem: https://www.reddit.com/r/buildapc/comments/6fe5op/ryzen_5_1600_stuck_at_1550_when_its_set_to_3800/dihhisf |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
|
|
Aurumvorax
Newbie Joined: 16 Jun 2018 Status: Offline Points: 42 |
Post Options
Thanks(0)
|
Aurumvorax
Newbie Joined: 16 Jun 2018 Status: Offline Points: 42 |
Post Options
Thanks(0)
|
Overclocking via BIOS, fixed CPU Voltage and LLC on level 2. I forgot to mention: It's only stuck at 1550MHz for the first boot for the day. When running the system for a while at 3.7GHz, I can clock as high as 3.8GHz afterwards. The next day the system will start again at 1550Mhz again however, unless clocked down to 3.7GHz again. Note that no settings are changed overnight in the BIOS. |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |