Z170 Extreme4+, Error C1 after Bios Update

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have been running my Z170 Extreme4+ with Bios 7.00 for almost two years without problems. 
Ram Type 4x Kingston HyperX Fury 8GByte HX426C15BK2/16

Because of Spectre vulnerability I have just flashed the new 7.40 Bios. Now my PC will not boot anymore. I get error code C1 right away. Clearing CMOS does not help. So I have switched BIOS from A to B. Now I have Bios 2.70 which is the initial BIOS the mainboard was delivered with. 2.70 boots fine.

I would like to get back to Bios 7.00. How to do it?

Edited by centaur555 - 17 Jul 2018 at 10:53pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
centaur555 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 08 Oct 2015 Status: Offline Points: 18	Post Options Post Reply Quote centaur555 Report Post Thanks(0) Quote Reply Topic: Z170 Extreme4+, Error C1 after Bios Update Posted: 17 Jul 2018 at 5:06pm
	I have been running my Z170 Extreme4+ with Bios 7.00 for almost two years without problems. Ram Type 4x Kingston HyperX Fury 8GByte HX426C15BK2/16 Because of Spectre vulnerability I have just flashed the new 7.40 Bios. Now my PC will not boot anymore. I get error code C1 right away. Clearing CMOS does not help. So I have switched BIOS from A to B. Now I have Bios 2.70 which is the initial BIOS the mainboard was delivered with. 2.70 boots fine. I would like to get back to Bios 7.00. How to do it? Edited by centaur555 - 17 Jul 2018 at 10:53pm