PSA: Stay away from 4.80 BIOS X370 Taichi |
Post Reply | Page <1 34567 15> |
Author | |
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
@ fox a bit blunt but he is right the reason its having so much trouble is the settings your asking are right on the limit i have am4 training on in fact its set to 5 loops/tries but i dont get that mad full speed fan rush (i know what it sounds like as it happens everytime i flash new bios for the first boot) but i dont get it at all day to day even at 3466mhz cl14 i get from power button push to asrock splash screen in 10 seconds ish and log in for windows in 15 ish seconds which bios do i use ???????????????? 3.1 seeing as all 4x versions only bring support for ryzen 2000 why would i bother to change yet as and when they fully support ryzen 1000 then maybe have you tried using the ryzen dram calculator ? and in fact what is your cpu overclock and volts ? i find to run ram stable i actually had to up my stable cpu volts a little bit not the soc but the actual cpu volts at 3.9ghz (the dram and soc are tweaked as well,but the cpu needed more volts to get ram stable on its vcore)
|
|
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
Cuba1hr
Newbie Joined: 24 May 2018 Location: Croatia Status: Offline Points: 35 |
Post Options
Thanks(1)
|
I will try 4.80 because on 4.72 I had more than 2000MB/s worse results im Memory benchmark than on 4.64, even on 3000MHz.
@ cx5 I haven't posted my timings yet because they were embarrasing or not stable:) On 4.72 I have tried, with my Hynix Corsair 3000, 3000MHz, 1.41V - but BSOD, same as lower 14-16-16-35 on 2933 LLC3, DRAMV 1.40 that lasted almost 3 days when it crashed. Now it's the fourth day running on 2933 with 16-17-17-35-56, 1T, LLC3 and DRAMV 1.39. Also, I concur with most points of virpz and Spectre73 so I won't write anything more except - high end board with so long waiting period since last release on the official site and on the other hand almost all their other X370 and X470 got new official update. It was a tough choice between this and Asus X370 Crosshair (Earlier I had one bad experience with Asus on Intel platform), so I got this one and have to stay with it for now. |
|
ASRock Taichi X370 UEFI v4.81; AMD Ryzen R7 2700X; Noctua NH-U12S x2 fans; Corsair Vengenace LPX 3000 2x16GB (CMK16GX4M1B3000C15); EVGA GeForce GTX1070 FTW; Corsair RM750i PSU
|
|
Cuba1hr
Newbie Joined: 24 May 2018 Location: Croatia Status: Offline Points: 35 |
Post Options
Thanks(0)
|
Hi guys, I just tried v4.80 and it is...DISASTER. I was expecting similar behavior like on 4.72 with better memory benchmark speeds, hoped for 3000MHz. The result is - I can't even boot/post (no memory training). Not on 3000 or 2933 MHz, higher voltages, timings and LLC (lower in case of ASRock) - no go.
I don't know what else I can say about ASRock - Father, forgive them for they do not know what they are doing. Went back to 4.72, 2933MHz - day 0 and counting...again. |
|
ASRock Taichi X370 UEFI v4.81; AMD Ryzen R7 2700X; Noctua NH-U12S x2 fans; Corsair Vengenace LPX 3000 2x16GB (CMK16GX4M1B3000C15); EVGA GeForce GTX1070 FTW; Corsair RM750i PSU
|
|
bigboss
Newbie Joined: 31 Jul 2017 Status: Offline Points: 34 |
Post Options
Thanks(0)
|
Which CPU? No wonder they didn't release it on their main site... What a lazy company.
|
|
Cuba1hr
Newbie Joined: 24 May 2018 Location: Croatia Status: Offline Points: 35 |
Post Options
Thanks(0)
|
It's in the signature. 2700X.
|
|
ASRock Taichi X370 UEFI v4.81; AMD Ryzen R7 2700X; Noctua NH-U12S x2 fans; Corsair Vengenace LPX 3000 2x16GB (CMK16GX4M1B3000C15); EVGA GeForce GTX1070 FTW; Corsair RM750i PSU
|
|
bigboss
Newbie Joined: 31 Jul 2017 Status: Offline Points: 34 |
Post Options
Thanks(0)
|
Got the same CPU, thanks, I won't update bios. FFS Assrock...
|
|
bigboss
Newbie Joined: 31 Jul 2017 Status: Offline Points: 34 |
Post Options
Thanks(0)
|
Guys keep making noise and maybe Assrock gonna pay attention and realize that motherboards need good bioses too and not only components.
|
|
J Z
Groupie Joined: 09 Sep 2016 Location: Germany Status: Offline Points: 961 |
Post Options
Thanks(0)
|
Hi guys,
The last couple of days had TW eMail contact in the right place and we now have the solution for the XMP Powerloss problems. I have some BIOSes here and little by little all are fixed. Please be patient for a while. |
|
Kind Regards,
JZ https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware https://www.facebook.com/asrock.de |
|
bigboss
Newbie Joined: 31 Jul 2017 Status: Offline Points: 34 |
Post Options
Thanks(0)
|
Thanks for informing us. Funny that an Asrock partner is more responsible than them.
|
|
virpz
Newbie Joined: 08 Aug 2018 Status: Offline Points: 27 |
Post Options
Thanks(0)
|
Thanks. I really want them to fix all the issues that they have been ignoring for so long:
|
|
Post Reply | Page <1 34567 15> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |