![]() |
AGESA 1.0.0.6b |
Post Reply ![]() |
Page <1 101112 |
Author | |||
datonyb ![]() Senior Member ![]() Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
![]() ![]() ![]() ![]() ![]() |
||
follow the link and instructions in the post above it may well help you get the ram working stable at 2933/3066 that program has been very very succesful |
|||
[url=https://valid.x86.fr/jpg250]
![]() 3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|||
![]() |
|||
chompers ![]() Newbie ![]() ![]() Joined: 07 Nov 2017 Location: Toronto Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
||
Which link? Anyways, I did get to 2933, by adjusting the Dram voltage, VDD to 1.35, and Proct to 48ohms. It seems to run stable so far |
|||
![]() |
|||
donalgodon ![]() Newbie ![]() ![]() Joined: 21 Sep 2017 Status: Offline Points: 90 |
![]() ![]() ![]() ![]() ![]() |
||
What die is it? I have the same kit with a Micron die (v 3.32) and it works for me with the XMP profile and no manual adjustments.
|
|||
![]() |
|||
Mavitis ![]() Newbie ![]() Joined: 20 Nov 2017 Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
||
I tried my best but cap is 2666 16-17-17-35.
Corsair Vegance LPX 3000 Asrock AB350 PRO4 No SOC voltage option in UEFI, motherboard sets it up to 0.95 when oc or XPM. It allows me to get 2666, but nothing more. Tried with Thaiphoon + Ryzen DRAM Calculator 0.9.9 v5 timmings. Tried CL15, but it allways ends up in safeload and seting up to cl16 and also loosen other advanced timmings(tRC for example). I belive that until Asrock allows us to set SOC voltage on this motherboard manualy its my cap.
Edited by Mavitis - 20 Nov 2017 at 8:48pm |
|||
![]() |
|||
KLU ![]() Newbie ![]() Joined: 24 May 2017 Status: Offline Points: 27 |
![]() ![]() ![]() ![]() ![]() |
||
I can't even boot now with 2933MHz, coz it's going 5 times through F9 and resets the settings to default. ![]() According to DRAM calc, I should be able to go at least with 3200MHz as I have 98% chip quality... I'm using latest Ryzen DRAM calc (v7), here are all my settings in BIOS and values from the calc: https://imgur.com/a/G3OH2 PS. What is the correlation between Rec., Min., Max. and Alt. values? If I'm using Max. values for voltage, should I use Alt 3 (max alternative?) then? Or just try Rec. and go up with Alt. in case of instability? I would appreciate some of your thoughts.
|
|||
![]() |
|||
![]() |
|||
datonyb ![]() Senior Member ![]() Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
![]() ![]() ![]() ![]() ![]() |
||
rec is first reccomended setting to try
alt is the alternative max is the value not to exceed also start off with clicking safe setting this should allow any cpu/board to use that setting for ram most can use fast setting extreme would require a decent cpu (silicone lottery) a decent board and a decent power supply if your seeming to get worse do a full cmos reset power cable out bios battery out press power switch and hold 5 seconds wait 5 mins and reconnect battery and power cable and reboot |
|||
[url=https://valid.x86.fr/jpg250]
![]() 3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|||
![]() |
|||
Alban ![]() Newbie ![]() Joined: 16 Dec 2017 Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
||
Hey, Guys
I need a little help here. I bought these G.Skill Trident Z 3200Mhz RAM (F4-3200C16D-16GTZKY), they are working at 2133Mhz on my AB350 Pro4. I managed to get up to 2400Mhz by activating XMP Profile but that's it. I've been reading some of yours post and reply but I'm not self-confident about setting up the BIOS manually. I'm a kind of dumb. Does somebody can help? I really love my RAM's and I wanna achieve a decent RAM frecuency. Here are my PC specs: Ryzen 7 1700 without OC Trident Z 3200Mhz Asrock AB350 Pro4 (bios 3.30) Gigabyte GTX 1080 Ti (N108TGAMINGOC-11GD)
Edited by Alban - 16 Dec 2017 at 10:12pm |
|||
![]() |
|||
zlobster ![]() Groupie ![]() Joined: 02 Sep 2017 Status: Offline Points: 403 |
![]() ![]() ![]() ![]() ![]() |
||
Hey Alban! The memory model you specified is not listed in the QVL for this board at all (http://www.asrock.com/mb/AMD/AB350%20Pro4/#Memory). There is a chance you won't get the 3200. ![]() From what I've heard around the web, Ryzens go very well with Flare X. Check my sig to see what I'm running. The RAM went to 3200 CL14 on the first click in UEFI. I really hope someone can bring you better news! |
|||
1700X ZP-B1 (stock); X370 Taichi (UEFI 3.10); 16GB F4-3200C14-8GFX XMP; 256GB 960 EVO; RX 580 NITRO+ 8GB
|
|||
![]() |
Post Reply ![]() |
Page <1 101112 |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |