![]() |
Z690 EXTREME with TPM |
Post Reply ![]() |
Author | |
dskyzedisme ![]() Newbie ![]() ![]() Joined: 21 Mar 2024 Location: Southeast Status: Offline Points: 20 |
![]() ![]() ![]() ![]() ![]() Posted: 21 Mar 2024 at 9:31pm |
I recently upgraded a Windows 11 machine with the Z690 EXTREME. After getting the board I couldn't get it to POST with the 14 Gen i7 processor. I updated the BIOS to the latest version and the machine POSTed on first try and booted straight to my Windows 11. After re-activating windows everything seems to running fine. I see a very noticeable difference in the speed, it is much faster than my old 9th Gen i9.
However knowing that Windows 11 supposedly doesn't support a motherboard without a TPM Chip installed, I had purchased one to install after the upgrading I bought a ASROCKRACK Accessory TPM 2.0 Module from Amazon and after getting the machine fully functional, I powered down the PC, installed the chip and then the PC would not power up, it was like the power button wasn't connected because absolutely nothing would happen when I pressed the button. so I pulled the chip off the board, and it still wouldn't power on UNTIL I disconnected the power cord and reconnected it and the PC powered on with no problem. I repeated this a few times to make sure. Thinking the chip was bad I returned to Amazon for a replacement which I got next day, HOWEVER this chip did exactly the same thing as the previous chip Before I go looking for a TPM from a different vendor, is there anyone who has experienced this and if so did you find a solution and if so what did you find. |
|
Z690 EXTREME
32 GB DDR4 Intel Core i7-14700K -14th Gen 20-Core (8P+12E) LGA 1700 |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |