|
My motherboard is not booting up |
Post Reply 
|
| Author | |
curi1999 
Newbie 
Joined: 22 Jul 2015 Location: Dominican Status: Offline Points: 8 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: My motherboard is not booting upPosted: 03 Sep 2015 at 9:21pm |
|
My motherboard was turn off during the bios update and now is not booting up.. my motherboard is FM2A75 Pro4-M..
|
|
 |
|
|
Xaltar
Moderator Group 
Joined: 16 May 2015 Location: Europe Status: Online Points: 24518 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Sep 2015 at 10:53pm |
|
If the system lost power and was unable to complete the BIOS update then unfortunately the BIOS is unrecoverable and by extension the board is unusable. Fortunately all is not lost, you can order a new BIOS chip from ASRock directly and replace the damaged one.
The info you need can be found here. The BIOS chip is $5 US + shipping. With a new BIOS chip your board should be good as it was before the failed update  Good luck and welcome to the forums
 |
|
|
|
|
parsec
Moderator Group
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Sep 2015 at 11:39pm |
|
What method were you using for the BIOS update?
If you were using Instant Flash, some ASRock boards can recover from a loss of power during an Instant Flash BIOS update. Just put the USB flash drive with the Instant Flash BIOS update file (in a USB 2.0 port on the board's IO panel) and start the PC. If you are lucky the BIOS update will start again on its own and hopefully complete. ASRock in the past stated this would work on some of their boards, maybe you will be lucky. |
|
|
|
|
|
|
curi1999
Newbie
Joined: 22 Jul 2015 Location: Dominican Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 Sep 2015 at 10:23pm |
|
I used the regular way the the usb bios update.. but, Do you know if i try to do this in this motherboard.
|
|
|
|
|
curi1999
Newbie
Joined: 22 Jul 2015 Location: Dominican Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 Sep 2015 at 10:31pm |
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
curi1999 wrote: