|
Fatal1ty X399 random bootmgr is corrupt |
Post Reply 
|
Page <12 |
| Author | |
wardog 
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 25 Mar 2018 at 6:23am |
|
Max, check your Inbox here for a PM in a minute or three.
|
|
 |
|
|
Max30
Newbie 
Joined: 24 Mar 2018 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 25 Mar 2018 at 6:52am |
If so, it depends on the drivers of some components of the motherboard or the processor drivers. the other components were installed on another pc that did not have this problem.
|
|
|
|
|
Max30
Newbie
Joined: 24 Mar 2018 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 May 2018 at 11:52pm |
|
I believe that this motherboard has compatibility problems with the ram HX430C15PB3K4/64 .... Sometimes the following message appears when the PC is turned on: "BOOTMGR image is corrupt. The system cannot boot." and very rarely the pc freezes during windows loading. I tested the ram with memtest and tried a second identical kit.
|
|
|
|
|
ssateneth
Newbie
Joined: 19 Oct 2017 Status: Offline Points: 129 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2018 at 6:12pm |
|
Set the memory to default 2133 speeds (no OC, no XMP) and load default settings then report back.
|
|
|
MB: X399 Taichi, UEFI L3.32
VGA: EVGA 1080 Ti FTW3 PSU: Seasonic PRIME 1300 W PLATINUM CPU: AMD Ryzen Threadripper 2950X MEM: 4x16GB, 3600MHz G.Skill Trident Z F4-3600C17Q-64GTZKW |
|
|
|
|
Max30
Newbie
Joined: 24 Mar 2018 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jul 2018 at 5:19pm |
|
I always have the same problem, change the setting only changes the frequency with which it occurs
|
|
|
|
|
Max30
Newbie
Joined: 24 Mar 2018 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jul 2018 at 12:26am |
|
I have updated the bios to 3.10 (default settings) now windows randomly freeze....never happened before...
problems with 2.00: Random "BOOTMGR image is corrupt. The system cannot boot." on startup Random freeze during windows loading The most stable configuration is setting the ram to 2400 1.35v and increase soc voltage to 1.1 (reducing the problem from 2/3 times a week to 2/3 times a month) with my configuration there are problems in the voltage management that causes these problems
|
|
|
|
|
Max30
Newbie
Joined: 24 Mar 2018 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2018 at 4:25pm |
|
I tried different settings but the 3.10 bios problem persists.
Returning to bios 2.00 the problem disappear but the 2.00 bios problems listed above remain.
|
|
|
|
|
Max30
Newbie
Joined: 24 Mar 2018 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 Dec 2018 at 1:35am |
|
update:
I have updated the bios to 3.30 (default settings) windows randomly freeze.... I have been forced to go back to version 2.00, it has random problems at startup, but at least I can use the PC I'm starting to think that asrock is not interested in solving these bios problems... problems with 2.00: Random "BOOTMGR image is corrupt. The system cannot boot." on startup (frequency varies according to the ram configuration) Random freeze during windows loading (very rarely) ram kit used: HX430C15PB3K4/64 |
|
|
|
|
xhue
Groupie 
Joined: 17 Aug 2018 Status: Offline Points: 634 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 Dec 2018 at 7:13am |
Yes Max, they are not... Sad but true. I had to dump my otherwise perfect Taichi due to the same reason - no proper UEFI support. After I dumped it, I never looked back. Never again ASRock in my builds. |
|
|
|
|
Post Reply
|
Page <12 |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
badbri wrote: