Asrock Z370 Taichi -A-Tuning-Utility dangerous bug

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Helllo,

i used the A-Tuning-Utility (newest version 3.0.184) and set some voltages, than i klicked apply. 

I have seen several times wrong values set, which i have never set.

For example:

VCCSA 1,56 V => I set it maximum to 1,15 V 

or DMI 1,859 V => I never touched this parameter

If this tool reallly applied this values the cpu could be already damaged. It works, but you cant look inside the die what happened there. 

I dont understand why Asrock is offering such a buggy and dangerous tool, i dont know if this values has been ever applied by the motherboard. I've deinstalled the tool and wont use it again. 

But if it is the case, that this harmful values has been apllied,  they are playing with your pretty expensive cpus.

There are no warnings, if the tool is using damaging values, as you know from other vendors. 

You need to scroll down every time check the whole chart, to verify that the tool hasn't set some wrong, dangerous  and damaging values by itself.

Best regards

bug1234

Edited by bug1234 - 22 Feb 2018 at 11:08pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
bug1234 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Feb 2018 Status: Offline Points: 3	Post Options Post Reply Quote bug1234 Report Post Thanks(0) Quote Reply Topic: Asrock Z370 Taichi -A-Tuning-Utility dangerous bug Posted: 22 Feb 2018 at 11:02pm
	Helllo, i used the A-Tuning-Utility (newest version 3.0.184) and set some voltages, than i klicked apply. I have seen several times wrong values set, which i have never set. For example: VCCSA 1,56 V => I set it maximum to 1,15 V or DMI 1,859 V => I never touched this parameter If this tool reallly applied this values the cpu could be already damaged. It works, but you cant look inside the die what happened there. I dont understand why Asrock is offering such a buggy and dangerous tool, i dont know if this values has been ever applied by the motherboard. I've deinstalled the tool and wont use it again. But if it is the case, that this harmful values has been apllied, they are playing with your pretty expensive cpus. There are no warnings, if the tool is using damaging values, as you know from other vendors. You need to scroll down every time check the whole chart, to verify that the tool hasn't set some wrong, dangerous and damaging values by itself. Best regards bug1234 Edited by bug1234 - 22 Feb 2018 at 11:08pm