FM2A88X-ITX+

Author

Message

Topic Search

Topic Options

chezmemo

Newbie

Joined: 30 Oct 2016
Status: Offline
Points: 11

Post Options

Post Reply

Quote chezmemo

Report Post

Thanks(0)

Quote

Posted: 01 Nov 2016 at 1:51am

DIMM # 2

SMBus address 0x51

Memory type DDR3

Module format UDIMM

Manufacturer (ID) Corsair (7F7F9E00000000000000)

Size 8192 MBytes

Max bandwidth PC3-10700 (667 MHz)

Part number CMD16GX3M2A2400C10

Number of banks 8

Nominal Voltage 1.50 Volts

EPP no

XMP yes

XMP revision 1.3

AMP no

JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency

JEDEC #1 6.0-6-6-17-22 @ 457 MHz

JEDEC #2 7.0-7-7-20-26 @ 533 MHz

JEDEC #3 9.0-9-9-24-33 @ 666 MHz

XMP profile XMP-2400

Specification PC3-19200

Voltage level 1.650 Volts

Min Cycle time 0.833 ns (1200 MHz)

Max CL 10.0

Min tRP 9.96 ns

Min tRCD 9.96 ns

Min tWR 13.25 ns

Min tRAS 25.75 ns

Min tRC 35.75 ns

Min tRFC 260.63 ns

Min tRTP 8.25 ns

Min tRRD 5.75 ns

Command Rate 1T

XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)

XMP #1 6.0-8-8-19-27-1T @ 728 MHz (1.650 Volts)

XMP #2 10.0-12-12-31-43-1T @ 1200 MHz (1.650 Volts)

chezmemo

Newbie

Joined: 30 Oct 2016
Status: Offline
Points: 11

Post Options

Post Reply

Quote chezmemo

Report Post

Thanks(0)

Quote

Posted: 01 Nov 2016 at 1:51am

DIMM # 1

SPD registers

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00 92 11 0B 02 04 21 00 09 03 11 01 08 0C 00 2C 00

10 69 78 69 30 69 11 20 81 20 08 3C 3C 00 F0 83 81

20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

30 00 00 00 00 00 00 00 00 00 00 00 00 0F 22 01 01

40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

70 00 00 00 00 00 02 9E 01 00 00 00 00 00 00 D5 93

80 43 4D 44 31 36 47 58 33 4D 32 41 32 34 30 30 43

90 31 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00

A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

B0 0C 4A 01 13 01 08 01 08 11 2D 07 42 44 00 35 50

C0 50 6A 10 CE 1E 3E 00 25 08 42 2E 00 F6 3C 00 00

D0 0C 00 24 D6 F4 D8 D8 00 00 00 00 81 00 00 00 00

E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

DIMM # 2

SPD registers

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00 92 11 0B 02 04 21 00 09 03 11 01 08 0C 00 2C 00

10 69 78 69 30 69 11 20 81 20 08 3C 3C 00 F0 83 81

20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

30 00 00 00 00 00 00 00 00 00 00 00 00 0F 22 01 01

40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

70 00 00 00 00 00 02 9E 01 00 00 00 00 00 00 D5 93

80 43 4D 44 31 36 47 58 33 4D 32 41 32 34 30 30 43

90 31 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00

A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

B0 0C 4A 01 13 01 08 01 08 11 2D 07 42 44 00 35 50

C0 50 6A 10 CE 1E 3E 00 25 08 42 2E 00 F6 3C 00 00

D0 0C 00 24 D6 F4 D8 D8 00 00 00 00 81 00 00 00 00

E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

chezmemo

Newbie

Joined: 30 Oct 2016
Status: Offline
Points: 11

Post Options

Post Reply

Quote chezmemo

Report Post

Thanks(0)

Quote

Posted: 01 Nov 2016 at 1:52am

Chipset

-------------------------------------------------------------------------

Northbridge AMD K15 IMC rev. 00

Southbridge AMD A88X FCH rev. 2.6

Graphic Interface PCI-Express

PCI-E Link Width x0

PCI-E Max Link Width x0

Memory Type DDR3

Memory Size 16 GBytes

Channels Dual

Memory Frequency 1215.2 MHz (1:12)

CAS# latency (CL) 10.0

RAS# to CAS# delay (tRCD) 12

RAS# Precharge (tRP) 12

Cycle Time (tRAS) 31

Bank Cycle Time (tRC) 43

Uncore Frequency 1822.8 MHz

parsec

Moderator Group

Joined: 04 May 2015
Location: USA
Status: Offline
Points: 4996

Post Options

Post Reply

Quote parsec

Report Post

Thanks(0)

Quote

Posted: 01 Nov 2016 at 11:09am

The default, Auto speed of your memory is 1333, that is normal.

Your memory will not automatically run at 2400, you must set it to 2400 yourself.

You can set the memory speed to 2400 by doing this:

In the BIOS, OC Tweaker screen, find the DRAM Frequency option, and set it to 2400. You will also need to set the DRAM Voltage to 1.65V. You will also need to go to the DRAM Timing Control screen, and set the memory timings to the correct values for the 2400 speed.

Or as wardog said, if you find an XMP setting in the DRAM Frequency options, select it and it should set the memory speed to 2400, and set the DRAM Voltage to 1.65V.

The information page for your memory on Corsair's website does not say it is compatible with AMD boards and processors. It does show two Intel boards, Z77 and X79. Scroll down on this page to the Contents and Specifications section:

http://www.corsair.com/en-us/dominator-platinum-with-corsair-link-connector-1-65v-16-gb-dual-channel-ddr3-memory-kit-cmd16gx3m2a2400c10

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
chezmemo Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 30 Oct 2016 Status: Offline Points: 11	Post Options Post Reply Quote chezmemo Report Post Thanks(0) Quote Reply Posted: 01 Nov 2016 at 1:51am
	DIMM # 2 SMBus address 0x51 Memory type DDR3 Module format UDIMM Manufacturer (ID) Corsair (7F7F9E00000000000000) Size 8192 MBytes Max bandwidth PC3-10700 (667 MHz) Part number CMD16GX3M2A2400C10 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP yes XMP revision 1.3 AMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-17-22 @ 457 MHz JEDEC #2 7.0-7-7-20-26 @ 533 MHz JEDEC #3 9.0-9-9-24-33 @ 666 MHz XMP profile XMP-2400 Specification PC3-19200 Voltage level 1.650 Volts Min Cycle time 0.833 ns (1200 MHz) Max CL 10.0 Min tRP 9.96 ns Min tRCD 9.96 ns Min tWR 13.25 ns Min tRAS 25.75 ns Min tRC 35.75 ns Min tRFC 260.63 ns Min tRTP 8.25 ns Min tRRD 5.75 ns Command Rate 1T XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage) XMP #1 6.0-8-8-19-27-1T @ 728 MHz (1.650 Volts) XMP #2 10.0-12-12-31-43-1T @ 1200 MHz (1.650 Volts)

chezmemo Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 30 Oct 2016 Status: Offline Points: 11	Post Options Post Reply Quote chezmemo Report Post Thanks(0) Quote Reply Posted: 01 Nov 2016 at 1:51am
	DIMM # 1 SPD registers 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 92 11 0B 02 04 21 00 09 03 11 01 08 0C 00 2C 00 10 69 78 69 30 69 11 20 81 20 08 3C 3C 00 F0 83 81 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 0F 22 01 01 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 00 00 00 00 02 9E 01 00 00 00 00 00 00 D5 93 80 43 4D 44 31 36 47 58 33 4D 32 41 32 34 30 30 43 90 31 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 B0 0C 4A 01 13 01 08 01 08 11 2D 07 42 44 00 35 50 C0 50 6A 10 CE 1E 3E 00 25 08 42 2E 00 F6 3C 00 00 D0 0C 00 24 D6 F4 D8 D8 00 00 00 00 81 00 00 00 00 E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DIMM # 2 SPD registers 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 92 11 0B 02 04 21 00 09 03 11 01 08 0C 00 2C 00 10 69 78 69 30 69 11 20 81 20 08 3C 3C 00 F0 83 81 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 0F 22 01 01 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 00 00 00 00 02 9E 01 00 00 00 00 00 00 D5 93 80 43 4D 44 31 36 47 58 33 4D 32 41 32 34 30 30 43 90 31 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 B0 0C 4A 01 13 01 08 01 08 11 2D 07 42 44 00 35 50 C0 50 6A 10 CE 1E 3E 00 25 08 42 2E 00 F6 3C 00 00 D0 0C 00 24 D6 F4 D8 D8 00 00 00 00 81 00 00 00 00 E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

chezmemo Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 30 Oct 2016 Status: Offline Points: 11	Post Options Post Reply Quote chezmemo Report Post Thanks(0) Quote Reply Posted: 01 Nov 2016 at 1:52am
	Chipset ------------------------------------------------------------------------- Northbridge AMD K15 IMC rev. 00 Southbridge AMD A88X FCH rev. 2.6 Graphic Interface PCI-Express PCI-E Link Width x0 PCI-E Max Link Width x0 Memory Type DDR3 Memory Size 16 GBytes Channels Dual Memory Frequency 1215.2 MHz (1:12) CAS# latency (CL) 10.0 RAS# to CAS# delay (tRCD) 12 RAS# Precharge (tRP) 12 Cycle Time (tRAS) 31 Bank Cycle Time (tRC) 43 Uncore Frequency 1822.8 MHz

parsec Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996	Post Options Post Reply Quote parsec Report Post Thanks(0) Quote Reply Posted: 01 Nov 2016 at 11:09am
	The default, Auto speed of your memory is 1333, that is normal. Your memory will not automatically run at 2400, you must set it to 2400 yourself. You can set the memory speed to 2400 by doing this: In the BIOS, OC Tweaker screen, find the DRAM Frequency option, and set it to 2400. You will also need to set the DRAM Voltage to 1.65V. You will also need to go to the DRAM Timing Control screen, and set the memory timings to the correct values for the 2400 speed. Or as wardog said, if you find an XMP setting in the DRAM Frequency options, select it and it should set the memory speed to 2400, and set the DRAM Voltage to 1.65V. The information page for your memory on Corsair's website does not say it is compatible with AMD boards and processors. It does show two Intel boards, Z77 and X79. Scroll down on this page to the Contents and Specifications section: http://www.corsair.com/en-us/dominator-platinum-with-corsair-link-connector-1-65v-16-gb-dual-channel-ddr3-memory-kit-cmd16gx3m2a2400c10