A300 -Windows will not boot after BIOS update

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi.

I'm using A300 for few months now, today I,ve updated bios to 3.6 from 3.5 and since than is always booting only into bios.

1. Using M2 SSD, looks like system is not deteting it, therefore windows not loading
2. I,ve tried many bios  settings, no change
3. Opened case, removed M2 are put back in - no change
4. Tried going back to 3.5 bios - no change

Please advise if there is any bios setting that could overwrite it

thanks

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
IgJe Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 28 Dec 2019 Status: Offline Points: 3	Post Options Post Reply Quote IgJe Report Post Thanks(0) Quote Reply Topic: A300 -Windows will not boot after BIOS update Posted: 28 Dec 2019 at 10:45pm
	Hi. I'm using A300 for few months now, today I,ve updated bios to 3.6 from 3.5 and since than is always booting only into bios. 1. Using M2 SSD, looks like system is not deteting it, therefore windows not loading 2. I,ve tried many bios settings, no change 3. Opened case, removed M2 are put back in - no change 4. Tried going back to 3.5 bios - no change Please advise if there is any bios setting that could overwrite it thanks

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 31 Dec 2019 at 10:03am
	Dear IgJe, Thank you for choosing ASRock. If your Windows is install at GPT mode, please set the Windows boot manger to the first boot device. If your system is install at MBR mode, please set the system SSD to the first boot device. Thanks! Yours truly, ASRock TSD