New Asrock J5040 doesn't boot or beep |
Post Reply |
Author | |
adri.foschi
Newbie Joined: 03 Feb 2021 Status: Offline Points: 8 |
Post Options
Thanks(0)
Posted: 03 Feb 2021 at 9:11pm |
Hello,
I'm building a mini pc using: - Asrock j5040 itx motherboard - Antec ISK 110 itx case 90w - Crucial 8gb ddr4 RAM CT8G4SFS824A I connected power ram, btn, leds, hdaudio, usb and hdmi. The led power on but no output on hdmi port. I tried to remove the ram but it doesn't beep or anything. It seems died. I tried to clear CMOS too but without success. What happens? Thanks you |
|
adri.foschi
Newbie Joined: 03 Feb 2021 Status: Offline Points: 8 |
Post Options
Thanks(0)
|
Update: tried with vga cable, tried with only one ram, tried with another psu.
Same behavior :( |
|
BeCube
Newbie Joined: 03 Feb 2021 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
Same here
The RAM are listed official with "compatible"... |
|
RPI8GB
Newbie Joined: 05 Feb 2021 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Same issue here with crucial.. just resolved with patriot (PSD48G240081S)
|
|
Will_BC
Newbie Joined: 22 hours 3 minutes ago Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hey did you guys ever figure out a solution?
My old board Asrock Q1900 (Celeron J1900 embedded) died so I ordered the J5040 from Amazon with Patriot 16GB (2x8GB) DDR4-3200 (shows as DDR4 2400 in BIOS). When it boots and I go into BIOS, i can see the USB flash drive and SATA drives. The SATA drives are not shown as a boot option though. And when I try to boot (default or override) from USB flash drive, it freezes (clock on bottom right even stops). |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |