Asrock H510 Pro BTC+ ERROR

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello,

I have a new motherboard H510 Pro BTC+, when i turn on the motherboard it gives me 5 beeps, when i take the GPU out it runs normally.

I tried 3 GPUs already and all the same i get 5 beeps without screen or anything. 

I did update the bios already.

Need Help.

BTW, on the motherboard i plugged not all the molex cables only two.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
activoads Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 Jan 2022 Status: Offline Points: 20	Post Options Post Reply Quote activoads Report Post Thanks(0) Quote Reply Topic: Asrock H510 Pro BTC+ ERROR Posted: 13 Jan 2022 at 4:31am
	Hello, I have a new motherboard H510 Pro BTC+, when i turn on the motherboard it gives me 5 beeps, when i take the GPU out it runs normally. I tried 3 GPUs already and all the same i get 5 beeps without screen or anything. I did update the bios already. Need Help. BTW, on the motherboard i plugged not all the molex cables only two.

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 14 Jan 2022 at 6:00pm
	Hi activoads, Thank you for your post. 5 beeps error code means the problem may be related to the CPU or the system not detect video output. Please verify by the below suggestions. 1. Make sure the video cable is connected to the graphic card. 2. Clear CMOS by referring to the user manual page. 16. User manual: https://download.asrock.com/Manual/H510%20Pro%20BTC%2b.pdf 3. Only install CPU, PSU, Cooler, RAM, Graphics card to check if the system can boot into BIOS setup. 4. Install one stick RAM on each slot by turns to repeat suggestion 2 to check if the problem relates to a specific RAM stick or slot. 5. If possible, please use other CPUs and RAM to cross-test to check if the problem relates to the compatibility of the memory and CPU. Also, about the Molex connector, please refer to our below link to check our recommendation setup. https://www.asrock.com/support/faq.asp?id=503 All the best, ASRock TSD

Liandri Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 28 Mar 2022 Status: Offline Points: 15	Post Options Post Reply Quote Liandri Report Post Thanks(0) Quote Reply Posted: 28 Mar 2022 at 12:39pm
	Is the same problem i try to reset my cmos but no video only 5 beeps.

threadzipper1957 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9365	Post Options Post Reply Quote threadzipper1957 Report Post Thanks(0) Quote Reply Posted: 28 Mar 2022 at 9:02pm
	Dear Liandri, There are a few things to check Is your CPU, in the CPU support list? http://www.asrock.com/mb/Intel/H510%20Pro%20BTC+/index.asp#Support And which BIOS version is on there? Now to the 5 beeps, this should be, no console Input, or output devcie is found, meaning, keyboard/mouse, or monitor not detected. Please use a wired USB keyboard and mouse, and connect a monitor to the graphics card, because all 3 have to be detected. In BIOS>> Advanced>> Chipset configuration, Above 4G decoding must be set to enabled, CAM Clever Access memory, you can try to set to disabled, because not all graphics card can work with it. And under Boot, set CSM to Disabled. Now it should work. It it works, try this one card on every slot, if that works all slots work. PCIE lanes also come from the CPU, please check if the pins in the CPU socket are okay, and do not mount the CPU cooler too tight, this can cause the CPU and socket, to bend under the pressure and can cause contact problems, usually this cause memory problems, or PCIE slots that don't work properly
	Kind Regards

ozilker07 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Dec 2022 Status: Offline Points: 30	Post Options Post Reply Quote ozilker07 Report Post Thanks(0) Quote Reply Posted: 18 Dec 2022 at 12:08pm
	If 1 slot card is installed, the motherboard does not react, if a card is inserted into the video card slots, it does not react, and it does not display, does not connect, it did not give similar symptoms in a few months of use, these days it opens sometimes and sometimes it does not turn on, with zero ambush. It didn't matter if I used it, can this be fixed with software, the psu does not react to opening, it does regular action when it is opened, it insists that I open it when I close it. If I switch to bios 1.40, 1.50 bios, do they need fixes or maintenance, thanks respects

ozilker07 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Dec 2022 Status: Offline Points: 30	Post Options Post Reply Quote ozilker07 Report Post Thanks(0) Quote Reply Posted: 18 Dec 2022 at 12:27pm
	I have an amazon invoice, BUT IN MY COUNTRY, THERE IS NO AUTHORIZED SERVICE WHY NO DEVELOPMENT ON THIS ISSUE WHAT CAN BE DONE 1. CARD PCIe slot sees the card, next pcie slots do not see the card, bios 1.40 . Should I switch to 1.50, will this be fixed?

ozilker0740 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 Dec 2023 Location: antalya Status: Offline Points: 15	Post Options Post Reply Quote ozilker0740 Report Post Thanks(0) Quote Reply Posted: 13 Dec 2023 at 2:46am
	H510 Pro BTC+ anakartımı gerekli kartları takıp tek pusu ile çalı?tırmak için açmaya çalı?tım, hiç tepki vermedi,tek kart dened?m y?ne açılmadı, kartsız da açılmıyor bıos ekranı da gelmiyor, ne yapılabilir,heryer? temiz, ba?lantıları da kesinlikle do?ruuduri neden tepkii vermiyor, birkçaç farklı rram denedim, i?lemci de daha önceki kullandı?ım i?lemci, anakarta uyumlu, anakart psu ya açılma teti?i vermiyor,