UEFI freezes when starting up.

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello all I know nothing of computers but I just replaced my motherboard today. I got the exact same one I had before (B450M Pro4-CB) I got the new board in and tried to play call of duty but it was unplayable and things were loading extremely slow and it wasn?�t like that before. Then I noticed I had miss plugged a flat cable. They were supposed to be stacked but I had them side by side. So I fixed it then tried to power up and it went to the uefi. I didn?�t know what it was so I looked around it for a moment and noticed I could turn on ultra fast boot up so I did. I also turned on the boot beep. And when I saved and exited, it pulled up the cyberpowerpc logo then back to the uefi screen but this time the whole screen wasn?�t in frame and after a second the Pc froze. Now when those two flat cables are hooked the way I originally had them(which is incorrect) it will boot up no problem but when I put the two cables in their proper places it always goes to the uefi and freezes. Please help if possible. Thanks in advance.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Gibbster1246 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 31 Oct 2021 Location: Oklahoma Status: Offline Points: 20	Post Options Post Reply Quote Gibbster1246 Report Post Thanks(0) Quote Reply Topic: UEFI freezes when starting up. Posted: 31 Oct 2021 at 4:44pm
	Hello all I know nothing of computers but I just replaced my motherboard today. I got the exact same one I had before (B450M Pro4-CB) I got the new board in and tried to play call of duty but it was unplayable and things were loading extremely slow and it wasn?�t like that before. Then I noticed I had miss plugged a flat cable. They were supposed to be stacked but I had them side by side. So I fixed it then tried to power up and it went to the uefi. I didn?�t know what it was so I looked around it for a moment and noticed I could turn on ultra fast boot up so I did. I also turned on the boot beep. And when I saved and exited, it pulled up the cyberpowerpc logo then back to the uefi screen but this time the whole screen wasn?�t in frame and after a second the Pc froze. Now when those two flat cables are hooked the way I originally had them(which is incorrect) it will boot up no problem but when I put the two cables in their proper places it always goes to the uefi and freezes. Please help if possible. Thanks in advance.

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 01 Nov 2021 at 4:58pm
	Dear Gibbster1246, Thank you for posting your query to the ASRock forum. Regarding your question, please refer to the page. 29 to clear the CMOS. https://download.asrock.com/Manual/B450M%20Pro4.pdf After the CMOS is cleared, the BIOS settings will load to default. And the system should be able to boot up properly. With thanks, ASRock TSD