New build constantly shutting. 1920x on x3999 taic

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I am having issues with my new build shutting down after start up. It will stay on for 2 to 7 minutes and shut down. When in the bios or at the asrock app in windows it shows the cpu at roughly 60c at start up. It climbs to roughly 70 or just about 70 and shuts down.

All other components show at around 27c.  Room is at 22c.

I have a corsair h150i rgb xt AIO (360mm with 3 fans). I have wiped off all paste and rei stalled with no change.i have felt the tubes right next to the pump and can feel the liquid moving.

I have bios 3.9 which came with the mother board.
CPU is 1920x threadripper. 
Ram is a trident 3600 (4x16gb)
Hard drives are wd black m.2 1tb and a scan disk 2tb ssd.
1 have a 1200watt psu. Checked this with thermaltake psu device and shows good.

Should I use a different bios version? Should I buy new cables since that is the only thing not yet replaced except the psu?

Any help is greatly appreciated. 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Zsadik64 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Aug 2020 Status: Offline Points: 4	Post Options Post Reply Quote Zsadik64 Report Post Thanks(0) Quote Reply Topic: New build constantly shutting. 1920x on x3999 taic Posted: 02 Aug 2020 at 9:47pm
	I am having issues with my new build shutting down after start up. It will stay on for 2 to 7 minutes and shut down. When in the bios or at the asrock app in windows it shows the cpu at roughly 60c at start up. It climbs to roughly 70 or just about 70 and shuts down. All other components show at around 27c. Room is at 22c. I have a corsair h150i rgb xt AIO (360mm with 3 fans). I have wiped off all paste and rei stalled with no change.i have felt the tubes right next to the pump and can feel the liquid moving. I have bios 3.9 which came with the mother board. CPU is 1920x threadripper. Ram is a trident 3600 (4x16gb) Hard drives are wd black m.2 1tb and a scan disk 2tb ssd. 1 have a 1200watt psu. Checked this with thermaltake psu device and shows good. Should I use a different bios version? Should I buy new cables since that is the only thing not yet replaced except the psu? Any help is greatly appreciated.

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 03 Aug 2020 at 3:05pm
	When you pull the H150i off, is it making good contact with your CPU? ample mounting pressure?
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

Zsadik64 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Aug 2020 Status: Offline Points: 4	Post Options Post Reply Quote Zsadik64 Report Post Thanks(0) Quote Reply Posted: 03 Aug 2020 at 6:45pm
	It is making good contact. This is seen by how the paste has spread on the cpu. The pressure is good. It seems the cpu is either running hot or falsely hot. This coller was able to tun a 3970x on full speed for a hour with no issues. I have finally got windows to load but still having issues with it shutting off. Using asrock tunning program in windows was able to set the computer on power saving mode. This gave me 30 minutes of use prior to shut down but I would like to be able to use this build at the speed of is capable of. Is there something I am missing. Can I raise the temperature that causes the computer to shut down? Could anything else be causing it to shut down?