Z97 Extreme6 shuts off immediately, Dr. Diag 00

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Hi All,

To eliminate variables, the board is not mounted in a case, only 
connected to the PSU, and only the CPU with stock cooler are installed. 
When I press the power button on the board, fans spin and Dr. Diag 
lights up 00. In less than a second, the board shuts back down. I've 
tried reseating the CPU and resetting CMOS. Is the board (or CPU) DOA? 
Anything else I can try?

PSU: EVGA Supernova 750 G2

CPU: i5-4690k

Thanks!    

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
wateronsand Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 Oct 2015 Status: Offline Points: 5	Post Options Post Reply Quote wateronsand Report Post Thanks(0) Quote Reply Topic: Z97 Extreme6 shuts off immediately, Dr. Diag 00 Posted: 26 Oct 2015 at 4:27am
	Hi All, To eliminate variables, the board is not mounted in a case, only connected to the PSU, and only the CPU with stock cooler are installed. When I press the power button on the board, fans spin and Dr. Diag lights up 00. In less than a second, the board shuts back down. I've tried reseating the CPU and resetting CMOS. Is the board (or CPU) DOA? Anything else I can try? PSU: EVGA Supernova 750 G2 CPU: i5-4690k Thanks!

ASRock Expert Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 04 Oct 2015 Location: Croatia Status: Offline Points: 220	Post Options Post Reply Quote ASRock Expert Report Post Thanks(0) Quote Reply Posted: 26 Oct 2015 at 5:41am
	What UEFI version sticker is on the EEPROM? It needst to be 1.30 or newer for the 4690k. http://www.asrock.com/mb/Intel/Z97%20Extreme6/?cat=CPU
	990FX Extreme 9 MOD P1.70 AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X

wateronsand Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 Oct 2015 Status: Offline Points: 5	Post Options Post Reply Quote wateronsand Report Post Thanks(0) Quote Reply Posted: 26 Oct 2015 at 7:36am
	Version is p2.30.

wateronsand Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 Oct 2015 Status: Offline Points: 5	Post Options Post Reply Quote wateronsand Report Post Thanks(0) Quote Reply Posted: 26 Oct 2015 at 2:31pm
	Mistake on my part, I neglected to connect the 8 pin CPU power connector. I misread the PSU docs as saying this connection was optional (it actually says that a secondary 8 pin connector, if present, is optional) - forgive me, it's been the better part of 10 years since I did a build. Connecting the 8 pin solved the problem. Thank you!

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 25043	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 26 Oct 2015 at 2:36pm
	Glad to hear you found the problem, enjoy your new build