taichi bios v2.40 (agesa 1006) is out, feedback

Velajan wrote: Well, since it looks like my other posts was purged I'm just going to post the same thing. My ram, Corsair Vengeance LED CMU16GX4M2C3200C16 (SK Hynix), went from being able to do 2666Mhz at 18-18-18-36 to being unable to do anything over 2133mhz 15-15-15-36. It doesn't matter what timings I choose, it will not boot past 2133mhz with the AGESA 1006 update, and responds even worse when I switch the command rate from 1T to 2T where it won't boot at 2133mhz. Voltage is at 1.35, which I have played with up to 1.45, SoC is at 1.1, which I have played with up to 1.2. Nothing. Works. Did I just manage to pick the absolute worst ram available?

What rev are your RAM? cause same ram run at 2933MHz.

Thx for the tips but it didnt help(((( i could start on 2933 cl16 2t/1t with soc 1.1 but get blue screen 0xd1 on simple work. I wonder if it is my memory issue or bios issue. On auto on 2.40 i get blue screen even on 30x100, all auto, memory auto(2400). I guess some work needs to be done in 2.x0 next bios. I just rolled back to 2.30 and now on 3800, ddr 2400 no blue screens and such under aida stress test full night