voltage issue x370 taichi

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   so i want to overclock my ryzen 1600 using pstate setting
my curent setting for pstate

pstate0
vid = 9c (3.9ghz)
did = 8
Fid =  123750 (as default pstate setting)

pstate1 
vid = 7c
did = 10
fid = 090000 (as default pstate setting)

can't remember the hex value for fid

mode = OC mode
offset vcore = 0.18125
c6 =disable
c-state controller = enable
core performance boost = disable
amd cool n quite = enable

up until know this setting are solid stable under prime95 or corona render engine with vcore topping at 1.424 v
but when i reboot the pc or starting the pc after shutdown (cold boot), the vcore start to jump to 1.456v(hwinfo, ryzen master, cpu-z).

it will back to normal vcore again after i reboot it the second time

but the the symptom continue if i restart, the vcore jump to 1.456v again and fix after i reboot it again.

how do i fix this issue?or is this ryzen spesific bug?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
imamnanda2502 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 12 Sep 2017 Location: indonesia Status: Offline Points: 10	Post Options Post Reply Quote imamnanda2502 Report Post Thanks(0) Quote Reply Topic: voltage issue x370 taichi Posted: 11 Oct 2017 at 1:47am
	so i want to overclock my ryzen 1600 using pstate setting my curent setting for pstate pstate0 vid = 9c (3.9ghz) did = 8 Fid = 123750 (as default pstate setting) pstate1 vid = 7c did = 10 fid = 090000 (as default pstate setting) can't remember the hex value for fid mode = OC mode offset vcore = 0.18125 c6 =disable c-state controller = enable core performance boost = disable amd cool n quite = enable up until know this setting are solid stable under prime95 or corona render engine with vcore topping at 1.424 v but when i reboot the pc or starting the pc after shutdown (cold boot), the vcore start to jump to 1.456v(hwinfo, ryzen master, cpu-z). it will back to normal vcore again after i reboot it the second time but the the symptom continue if i restart, the vcore jump to 1.456v again and fix after i reboot it again. how do i fix this issue?or is this ryzen spesific bug?

datonyb Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139	Post Options Post Reply Quote datonyb Report Post Thanks(0) Quote Reply Posted: 11 Oct 2017 at 5:56am
	when i use pstates i set cool and quiet off c states auto c6 off core performance switches off anyway with pstate overclock i then go to normal overclock page and set cpu volts oc fixed and auto this lets the p state control the volts i also select cpu vcore llc level 2 my volts stay within a hundreth of a volt e.g at the moment im on 1.325v it will never go above 1.329 yet on bios version 3.1 for some reason its still auto matically dropping volts on idle down to 0.500 ish without loosing any stability my pstates 9c 8 24 second set 9c 8 24 third set auto fourth set disabled
	[url=https://valid.x86.fr/jpg250][/url] 3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold