N3150M issue with 16GB RAM

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   First of all, sorry for my English.
I am having a problem installing two new modules of RAM on my motherboard N3150M. It works fine with 8GB (4Gb + 4GB). However, as I use design software and video editing (not my work is my hobby), I decided to go up to 16GB with two 8GB modules. However, when you install these two modules the computer makes the threat of boot during 3 seconds and then off. Then it try to start again and goes out again. And it stays in that loop attempting to start and off.

My tests:

- If I remove the 8GB modules and I install 4GB modules again, it run as usual.

- If use separately any new 8GB RAM module in any slot, the computer runs as usual.

- I've done CLEAR CMOS and the problem persists.

Therefore, only problems when the two 8GB modules are installed. If I only install one of them, work perfectly, regardless of the slot in which they are installed and the module I use.

New RAM modules: Kingston HyperX Fury Black DDR3 1600MHz 8GB CL10 - DDR3

Old RAM Modules: Kingston HyperX Fury Black DDR3 1600 PC3-12800 4GB CL10 - DDR3

SO: Windows 10 PRO 64 bits

The Power Supply is a 750W Corsair. It has some years, but no promlem until now. 

Thanks a lot! 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Eizan Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 May 2016 Status: Offline Points: 4	Post Options Post Reply Quote Eizan Report Post Thanks(0) Quote Reply Topic: N3150M issue with 16GB RAM Posted: 10 May 2016 at 5:46pm
	First of all, sorry for my English. I am having a problem installing two new modules of RAM on my motherboard N3150M. It works fine with 8GB (4Gb + 4GB). However, as I use design software and video editing (not my work is my hobby), I decided to go up to 16GB with two 8GB modules. However, when you install these two modules the computer makes the threat of boot during 3 seconds and then off. Then it try to start again and goes out again. And it stays in that loop attempting to start and off. My tests: - If I remove the 8GB modules and I install 4GB modules again, it run as usual. - If use separately any new 8GB RAM module in any slot, the computer runs as usual. - I've done CLEAR CMOS and the problem persists. Therefore, only problems when the two 8GB modules are installed. If I only install one of them, work perfectly, regardless of the slot in which they are installed and the module I use. New RAM modules: Kingston HyperX Fury Black DDR3 1600MHz 8GB CL10 - DDR3 Old RAM Modules: Kingston HyperX Fury Black DDR3 1600 PC3-12800 4GB CL10 - DDR3 SO: Windows 10 PRO 64 bits The Power Supply is a 750W Corsair. It has some years, but no promlem until now. Thanks a lot!

Eizan Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 May 2016 Status: Offline Points: 4	Post Options Post Reply Quote Eizan Report Post Thanks(0) Quote Reply Posted: 11 May 2016 at 9:03pm
	With great efforts, I solved the problem by myself. Thanks for nothing, Asrock.

marcolintrek Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 Jul 2016 Status: Offline Points: 6	Post Options Post Reply Quote marcolintrek Report Post Thanks(0) Quote Reply Posted: 13 Jul 2016 at 8:20pm
	hallo how did you solved? I've just posted similar question as the cpu from intel site has a maximum memory size of 8 GB while the motherboard state 16 GB maximum. thanks for your reply