B450 pro4 5 short beeps

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   hi fellas, 
i am bit unlucky here. just finished building my first ever ryzen build. after finishing all connections, the system failed to boot, nothing appears on monitor, says no signal. also while it is happening, there are 5 beeps shortly and all fans keep spinning.
my specs are
ryzen 1700
asrock b450 pro4 
hyperx fury 2x8gb
sapphire rx580 8gb
cougar cmx 1200w 
crucial nvme

please help me to address the issue. 

p.s. i tried cmos battery removal but no jumper included in my motherboard packages.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
bilguun Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Dec 2019 Location: Australia Status: Offline Points: 3	Post Options Post Reply Quote bilguun Report Post Thanks(0) Quote Reply Topic: B450 pro4 5 short beeps Posted: 18 Dec 2019 at 7:07pm
	hi fellas, i am bit unlucky here. just finished building my first ever ryzen build. after finishing all connections, the system failed to boot, nothing appears on monitor, says no signal. also while it is happening, there are 5 beeps shortly and all fans keep spinning. my specs are ryzen 1700 asrock b450 pro4 hyperx fury 2x8gb sapphire rx580 8gb cougar cmx 1200w crucial nvme please help me to address the issue. p.s. i tried cmos battery removal but no jumper included in my motherboard packages.

Ray62 Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706	Post Options Post Reply Quote Ray62 Report Post Thanks(0) Quote Reply Posted: 19 Dec 2019 at 7:08pm
	If you cannot find a jumper elsewhere, just use a tweezers to make the contact like the jumper would do for 5 seconds. When setting up a new system, the best is always to begin with a minimal config with the mainboard placed on the desk (on wood or the mobo box). Just with CPU, one RAM stick in slot A2, GPU, mouse and keyboard and all the correct PSU cables connected to see if the system is able to start the bios. And then step by step the other RAM stick and drive(s) will be added. 5 beeps point to a not running CPU. Correct ATX 12V Power Connector applied? Nr.1 in the manual. CPU correct seated? Another thing could be an incorrect mounting of the board in the case.
	Asrock Fatal1ty X370 Professional Gaming Offline Under test: MSI X570_MEG_ACE \| AMD Ryzen 9 3900X \| Scythe Mugen5 \| 2x16GB F4-3200C14D-32GTZ@3466 \| ASUS GeForce GTX 1080 Ti FE