![]() |
stable pc sometimes doesnt post. |
Post Reply ![]() |
Author | |
Tader ![]() Newbie ![]() ![]() Joined: 04 May 2016 Location: Lithuania Status: Offline Points: 47 |
![]() ![]() ![]() ![]() ![]() Posted: 26 Jan 2017 at 10:57pm |
on cold boot , i have to restart motherboard 970g /3.1 bios 1.20, only then overclocked to 225 fsb , tried increase voltages but it doesnt help.
|
|
![]() |
|
Zirw ![]() Newbie ![]() ![]() Joined: 25 Jan 2017 Status: Offline Points: 55 |
![]() ![]() ![]() ![]() ![]() |
![]() |
|
Tader ![]() Newbie ![]() ![]() Joined: 04 May 2016 Location: Lithuania Status: Offline Points: 47 |
![]() ![]() ![]() ![]() ![]() |
r9 380x g1 gaming, pcie using x16, gpuz shows x16 1.1, changes 2.0 then rendering
Edited by Tader - 27 Jan 2017 at 12:48am |
|
![]() |
|
Zirw ![]() Newbie ![]() ![]() Joined: 25 Jan 2017 Status: Offline Points: 55 |
![]() ![]() ![]() ![]() ![]() |
With any card from nvidia does not rise to 2.0. After turning off and turning on your PC falls to 1.1. I did not fall until the first shutdown. That is, if all is OK to restart, but if you turn off and then turn on, then pcie is defined as 1.1. Today I will take radeon r9 280x and try it. By the way I have above 225 bus fails to disperse!
|
|
![]() |
|
Tader ![]() Newbie ![]() ![]() Joined: 04 May 2016 Location: Lithuania Status: Offline Points: 47 |
![]() ![]() ![]() ![]() ![]() |
anyhting above 225 fsb fails to boot for me , even with increased voltages , idk maybe this mobo dont like fsb overclocks
Edited by Tader - 27 Jan 2017 at 1:38am |
|
![]() |
|
Zirw ![]() Newbie ![]() ![]() Joined: 25 Jan 2017 Status: Offline Points: 55 |
![]() ![]() ![]() ![]() ![]() |
What is your processor? I have a fx8350 even when picked up core voltage and North Bridge is similar does not take up 225. But for the multiplier to overclock if that unlike processor holds a 4.4 on the standard voltage! I think I still have some sort of problem with the motherboard bios after all the problems start when I try to overclock the busRemember that overclocking you overclock the bus and memory! Put the memory frequency below. Also see that the north bridge would not be higher than 2200, and HT 2200, 2400.
|
|
![]() |
|
kerberos_20 ![]() Senior Member ![]() ![]() Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3687 |
![]() ![]() ![]() ![]() ![]() |
if u have issues with fsb at 225 then dont overclock fsb then? your mobo might not be up to it.
ive had 890fx chipset before (Gigabyte GA-890FXA-UD5) and it could go to 263fsb max 870 is not teh highend, its actually at the bottom of 800 series...hence mobo components are cheap btw u cant lock pci-e frequency? my old 890fx could do that |
|
![]() |
|
nancywilson ![]() Newbie ![]() Joined: 21 Oct 2018 Location: USA Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
I have the issue in my Asus PC that sometimes stuck during running. What should i do to resolve this issue? I also try on asus support for the help purpose but did not get any response.
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |