Workstation build X99 Extreme 11 boot problems

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello Wardog & Parsec,

Both systems experience the exact same problems. So I thought the motherboard was troublesome so I already sent 1 motherboard back to the supplier which in it's turn send it back for checks and service.

When the system gets through the POST, Windows runs without any problems in graphics/RAM/stability so I do not suspect any other components any more. Also tested with some benchmark tools to really test stability & RAM. It's only inconsistent in booting. I must say that I did not see the slowing down in the BIOS yet for this motherboard. I boot it into the BIOS settings menus and then issue a CTRL+ALT+DELETE (is this OK?) to restart it and try to get in the BIOS again. Once every 5, 9 or 30 times this will fail with PCI-E codes in the 90 region, mostly 92. 

@Parsec, I only had BIOS version 3.0 which I upgraded to 3.2, that's all. I tried to set your BIOS settings, however I was surprised that for the PCIE1.2.3.4 and 5 Link Speed there was only Gen1 & Gen2 available. Shouldn't there also be a Gen3 as like you state? I've also used the other settings, I will continue with some tests. X99 Posts are long, so if you have to do 30 before a failure, it takes a while!

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
The_Dutchman Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 14 Dec 2016 Status: Offline Points: 5	Post Options Post Reply Quote The_Dutchman Report Post Thanks(0) Quote Reply Posted: 20 Dec 2016 at 6:52am
	Hello Wardog & Parsec, Both systems experience the exact same problems. So I thought the motherboard was troublesome so I already sent 1 motherboard back to the supplier which in it's turn send it back for checks and service. When the system gets through the POST, Windows runs without any problems in graphics/RAM/stability so I do not suspect any other components any more. Also tested with some benchmark tools to really test stability & RAM. It's only inconsistent in booting. I must say that I did not see the slowing down in the BIOS yet for this motherboard. I boot it into the BIOS settings menus and then issue a CTRL+ALT+DELETE (is this OK?) to restart it and try to get in the BIOS again. Once every 5, 9 or 30 times this will fail with PCI-E codes in the 90 region, mostly 92. @Parsec, I only had BIOS version 3.0 which I upgraded to 3.2, that's all. I tried to set your BIOS settings, however I was surprised that for the PCIE1.2.3.4 and 5 Link Speed there was only Gen1 & Gen2 available. Shouldn't there also be a Gen3 as like you state? I've also used the other settings, I will continue with some tests. X99 Posts are long, so if you have to do 30 before a failure, it takes a while!

phrenesis Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 28 Jan 2017 Status: Offline Points: 8	Post Options Post Reply Quote phrenesis Report Post Thanks(0) Quote Reply Posted: 28 Jan 2017 at 6:13am
	Hello The_Dutchman I have the same problems, but additional to that I also get WHEA errors, and everytime I try to update gpu drivers (or windows update) it crashes. Asus Strix 8-Gaming 1080 i7-6850k 4x 8GB HyperX Fury 2666MHZ 750W Corsair PSU I tried the 3.00 Bios and the 3.20 Bios, same errors. 50/50 Chance it will boot, Error 92-99 Once in Windows it shows WHEA Errors on the PCI Express Root Port

xnd Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Mar 2017 Status: Offline Points: 1	Post Options Post Reply Quote xnd Report Post Thanks(0) Quote Reply Posted: 02 Mar 2017 at 8:05pm
	Hi,i have the same kind of problem over here with x99 extreme 11 and i7 6850k,win 8.1. Maybe even worse,it only boots if leave it without power for a while(cable unplugged).But i get uncorectable error after 10 min most.

ali Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Mar 2017 Status: Offline Points: 4	Post Options Post Reply Quote ali Report Post Thanks(0) Quote Reply Posted: 02 Mar 2017 at 11:32pm
	Hi. Can u gays help me. I have new pc and it take too long to booting. 1min and more MB X99 extreme 4 ssd intenso sata III 512gb Cpu xeon e5-2683 v3

wardog Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447	Post Options Post Reply Quote wardog Report Post Thanks(0) Quote Reply Posted: 03 Mar 2017 at 5:11am
	We're seeing more and more of slow times when XMP is enabled/employed. If you have set your memory using XMP, try setting it(them) manually and post back.