C236 WSI - iGPU not working after BIOS update

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hoping that someone can help: 
I recently built a NAS using the Asrack C236 WSI motherboard.  Everything was going great until I upgraded the BIOS from P1.00 to P.2.10.

When I first built this box I installed a Skylake I3-6100 to use as a stopgap until the Kaby Lake Xeon E3's were released.  Now available, I upgraded the BIOS to support Kaby Lake.

Since I upgraded the system, with my Skylake I3, I only get display output from an Nvidia 1050ti installed in the PCI slot, even with Onboard selected as the Primary Graphics Adapter in BIOS.  I have also tried setting IGPU Multi-Monitor to Enabled/Disabled but neither setting makes any difference.

Prior to the upgrade, I used the iGPU as primary and was able to pass through the 1050ti to a Windows 10 VM with everything working perfectly.

I have not been able to try a Kaby Lake CPU since the update as I don't want to shell out for a CPU that may not work as required.

Are there any other settings in BIOS that I need to change to make this work?
Can I safely roll-back BIOS to P1.00?
Anything else that I may have have missed?

I contacted Asrack support through the form on their WWW site around 4 weeks ago and again yesterday but as yet did not receive a reply.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
JDBall Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 09 Sep 2017 Location: Singapore Status: Offline Points: 3	Post Options Post Reply Quote JDBall Report Post Thanks(0) Quote Reply Topic: C236 WSI - iGPU not working after BIOS update Posted: 09 Sep 2017 at 11:05am
	Hoping that someone can help: I recently built a NAS using the Asrack C236 WSI motherboard. Everything was going great until I upgraded the BIOS from P1.00 to P.2.10. When I first built this box I installed a Skylake I3-6100 to use as a stopgap until the Kaby Lake Xeon E3's were released. Now available, I upgraded the BIOS to support Kaby Lake. Since I upgraded the system, with my Skylake I3, I only get display output from an Nvidia 1050ti installed in the PCI slot, even with Onboard selected as the Primary Graphics Adapter in BIOS. I have also tried setting IGPU Multi-Monitor to Enabled/Disabled but neither setting makes any difference. Prior to the upgrade, I used the iGPU as primary and was able to pass through the 1050ti to a Windows 10 VM with everything working perfectly. I have not been able to try a Kaby Lake CPU since the update as I don't want to shell out for a CPU that may not work as required. Are there any other settings in BIOS that I need to change to make this work? Can I safely roll-back BIOS to P1.00? Anything else that I may have have missed? I contacted Asrack support through the form on their WWW site around 4 weeks ago and again yesterday but as yet did not receive a reply.