H110 Pro BTC+ - Boot only once after CMOS Reset

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   After assembled the system (specs below), it can only be boot up once after clearing CMOS (unplugged the battery and short the CMOS jumper to reset position up to 4 hrs). I managed to install Windows 10 and this issue still exist. When it fails to boot up, I can see the LAN lights on and the CPU fan spinning but monitor is not displaying anything. Again, I will need reset CMOS before I can boot up once. I tried unplugged every power cable, RAM, harddrive and same thing would occur. I haven't even put GPU yet so pretty sure nothing to do with the GPU or risers. Any help/suggestions will be appreciated.
System Specs:

CPU: Intel BX80662G4400 Pentium Processor G4400, 3.3 GHz

HDD: Crucial MX300 275GB SATA 2.5 Inch Internal Solid State Drive

RAM: CORSAIR Vengeance LPX 16GB (2x 8GB) DDR4 DRAM 3000MHz C15

Power Supply: Corsair HXi High Performance ATX12V 1200 Power Supply Series CP-9020070

GPU: N/A as I haven't even plug any of them in

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
kelrich Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 09 Oct 2017 Location: Vancouver Status: Offline Points: 3	Post Options Post Reply Quote kelrich Report Post Thanks(0) Quote Reply Topic: H110 Pro BTC+ - Boot only once after CMOS Reset Posted: 09 Oct 2017 at 1:22pm
	After assembled the system (specs below), it can only be boot up once after clearing CMOS (unplugged the battery and short the CMOS jumper to reset position up to 4 hrs). I managed to install Windows 10 and this issue still exist. When it fails to boot up, I can see the LAN lights on and the CPU fan spinning but monitor is not displaying anything. Again, I will need reset CMOS before I can boot up once. I tried unplugged every power cable, RAM, harddrive and same thing would occur. I haven't even put GPU yet so pretty sure nothing to do with the GPU or risers. Any help/suggestions will be appreciated. System Specs: CPU: Intel BX80662G4400 Pentium Processor G4400, 3.3 GHz HDD: Crucial MX300 275GB SATA 2.5 Inch Internal Solid State Drive RAM: CORSAIR Vengeance LPX 16GB (2x 8GB) DDR4 DRAM 3000MHz C15 Power Supply: Corsair HXi High Performance ATX12V 1200 Power Supply Series CP-9020070 GPU: N/A as I haven't even plug any of them in

mardesja Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 Oct 2017 Location: Canada Status: Offline Points: 1	Post Options Post Reply Quote mardesja Report Post Thanks(0) Quote Reply Posted: 11 Oct 2017 at 11:02pm
	Hello, I've same setup of you and I've the same problem. My system work fin for 2 week and now I can't restart my motherboard. Do you find something about this problem? Best Regards