Error: "System Failed To Boot Several Times"

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have same boot problem. 2 sticks of 16GB each in A2,B2 (32GB total).
It boots up fairly quickly in A2 alone but not with A2 and B2. How can I set the bios or something to boot up quickly instead of looking the memory over each time.
After about 3.5 min. of rebooting/trying, it gives the error and it boots up fine with 32GB of memory running just fine.
Thanks.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
American Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Dec 2024 Location: Texas Status: Offline Points: 15	Post Options Post Reply Quote American Report Post Thanks(0) Quote Reply Posted: 21 Dec 2024 at 12:57am
	I have same boot problem. 2 sticks of 16GB each in A2,B2 (32GB total). It boots up fairly quickly in A2 alone but not with A2 and B2. How can I set the bios or something to boot up quickly instead of looking the memory over each time. After about 3.5 min. of rebooting/trying, it gives the error and it boots up fine with 32GB of memory running just fine. Thanks.

duck-of-death Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 Mar 2025 Status: Offline Points: 15	Post Options Post Reply Quote duck-of-death Report Post Thanks(0) Quote Reply Posted: 11 Mar 2025 at 7:13am
	I found a solution, for me anyway. Had to hook up a VGA monitor. For some reason, after installing the M.2, it would not boot to my graphics card or the integrated HDMI. I reset BIOS and tried previously working SSD drives. Installed new RAM and also tried the old RAM, etc. Apparently it was booting and asking me to hit F1 to continue with the cleared CMOS changes. Hopefully this helps someone. I was about to order a new motherboard. Specs: Asrock z390 Pro4 GTX 1080 Intel i5-9600 128GB RAM (Crucial Pro RAM 64 GB DDR4 3200MHz) 4TB M.2 (Samsung)