B850M-X WiFi R2.0 POST issue

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   B850M-X WiFi R2.0 POST Issue

CPU : Ryzen 5 9600X
RAM : Klevv Bolt V DDR5 6000 32GB CL28
PSU : BeQuiet! Pure Power 13 M 850W
GPU : Gigabyte RTX 5060ti Windforce 8GB
SSD : WD Black SN7100 1TB
BIOS ver. : 4.43

My issue is that every time I turn on the PC for the first time after I turn it off for more than a few hours (e.g. overnight) I almost always get stuck at red + orange light status, which I assume is memory training. I then would have to wait for 5-10 mins, power off, then power on again and it usually will POST the 2nd time.

I build this PC last month (Aug 2026). I updated the BIOS to the version that was the latest at the time, which I presume it still is, via flashback method. I have tried waited for 2-3 hours and let it stuck there, no help. Other than that, everything seems to be working fine.

Thanks in advance for any help.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
fang.cha Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 5 hours 20 minutes ago Location: Thailand Status: Offline Points: 15	Post Options Post Reply Quote fang.cha Report Post Thanks(0) Quote Reply Topic: B850M-X WiFi R2.0 POST issue Posted: 4 hours 60 minutes ago at 2:41am
	B850M-X WiFi R2.0 POST Issue CPU : Ryzen 5 9600X RAM : Klevv Bolt V DDR5 6000 32GB CL28 PSU : BeQuiet! Pure Power 13 M 850W GPU : Gigabyte RTX 5060ti Windforce 8GB SSD : WD Black SN7100 1TB BIOS ver. : 4.43 My issue is that every time I turn on the PC for the first time after I turn it off for more than a few hours (e.g. overnight) I almost always get stuck at red + orange light status, which I assume is memory training. I then would have to wait for 5-10 mins, power off, then power on again and it usually will POST the 2nd time. I build this PC last month (Aug 2026). I updated the BIOS to the version that was the latest at the time, which I presume it still is, via flashback method. I have tried waited for 2-3 hours and let it stuck there, no help. Other than that, everything seems to be working fine. Thanks in advance for any help.

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 42228	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 3 hours 27 minutes ago at 4:14am
	BIOS version 4.43 is the latest for your board and came out in July so you likely already have the latest BIOS. When you say you have to wait 5-10 mins before powering off and back on for it to POST, does that mean it still refuses to POST if you power on, then back off then on again immediately? I have seen quite a few reports (from all brands) about needing to power off then back on again on cold boot but I don't recall seeing anyone needing to wait to do so. Things to try: 1. Disable EXPO/XMP and see if the behavior persists 2. Reset the BIOS to factory defaults and try like that without modification 3. Try enabling Memory Context Restore in the BIOS and see if that helps, it should be under Advanced\AMD CBS\UMC Common Options 4. If none of that helps, try using flashback again to the latest BIOS (even if you are already on it). Sometimes Flashback bugs out and doesn't write correctly. I hope this helps.