Z390 Taichi code 00

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I am building a new computer with i7 8700, 2xG.Skill trident Z rgb 16Gb 3200, and 1 SSD samsung 970 Evo. The monitor displays nothing (connected with display port) and I get a 00 code.

I tried to use the clear cmos button. I did not find the jumper to clear the CMOS, but I remove the battery and tried the button.
I removed the RAM and tried the A1, then the A2.
I reinstalled the CPU after checking that it looked fine.

I always get 00.

any suggestion ?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
autentic Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Jan 2019 Location: malaysia Status: Offline Points: 6	Post Options Post Reply Quote autentic Report Post Thanks(0) Quote Reply Topic: Z390 Taichi code 00 Posted: 22 Jan 2019 at 8:55pm
	I am building a new computer with i7 8700, 2xG.Skill trident Z rgb 16Gb 3200, and 1 SSD samsung 970 Evo. The monitor displays nothing (connected with display port) and I get a 00 code. I tried to use the clear cmos button. I did not find the jumper to clear the CMOS, but I remove the battery and tried the button. I removed the RAM and tried the A1, then the A2. I reinstalled the CPU after checking that it looked fine. I always get 00. any suggestion ?

RLGL Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 29 Jul 2018 Location: MN Status: Offline Points: 1995	Post Options Post Reply Quote RLGL Report Post Thanks(0) Quote Reply Posted: 22 Jan 2019 at 9:58pm
	Check this page; https://www.asrock.com/support/faq.asp?id=334 .Do you have the ATX 12 volt connector connected to the motherboard (CPU power)?
	Asrock Z370 Gaming K6,Intel i7 8700K, Asrock x570 Taichi

autentic Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Jan 2019 Location: malaysia Status: Offline Points: 6	Post Options Post Reply Quote autentic Report Post Thanks(0) Quote Reply Posted: 22 Jan 2019 at 11:42pm
	I have the 8 pin connected but not the 4 pin. Should I connect both ?

RLGL Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 29 Jul 2018 Location: MN Status: Offline Points: 1995	Post Options Post Reply Quote RLGL Report Post Thanks(0) Quote Reply Posted: 23 Jan 2019 at 10:15pm
	YES!
	Asrock Z370 Gaming K6,Intel i7 8700K, Asrock x570 Taichi

autentic Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Jan 2019 Location: malaysia Status: Offline Points: 6	Post Options Post Reply Quote autentic Report Post Thanks(0) Quote Reply Posted: 24 Jan 2019 at 9:58am
	How did you power the 8+4 pins ? do you have a cable 8 pins on one side and 8+4 pins on the other side.

autentic Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Jan 2019 Location: malaysia Status: Offline Points: 6	Post Options Post Reply Quote autentic Report Post Thanks(0) Quote Reply Posted: 24 Jan 2019 at 10:03am
	on internet, they all say that the 4 pins is optional and only for overclocking. For now I use only the 8 pins and the CPU is not warm

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8547	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 25 Jan 2019 at 10:45am
	Dear Autentic, Thank you for choosing ASRock. Z390 Taichi provides an 8-pin ATX 12V and a 4-pin ATX 12V connector. If your power supply only have 8-pin cable, please connect the 8-pin connector and the system can boot up without problem. About the Debug code 00, it usually means the CPU problem. If possible, please change another CPU to try. Thank you! Yours truly, ASRock TSD