G.SKILL F4-3200C16D-16GTZRX @ ASRock Fatal1ty B450 |
Post Reply |
Author | |
Dedalus
Newbie Joined: 29 Dec 2019 Location: Argentina Status: Offline Points: 78 |
Post Options
Thanks(0)
Posted: 31 Dec 2019 at 10:42am |
Hi. I have built this system:
-Motherboard: ASRock Fatal1ty B450 Gaming K4. -CPU: Ryzen 7 2700. -GPU: GTX 1060, 3GB. -RAM: G.skill Tridentz Rgb 16gb (2 X 8gb) 3200 Mhz- For Amd (G.SKILL F4-3200C16D-16GTZRX). -SSD: Ssd Wd 240gb Green M.2 Western Digital. -Power supply: Evga Bronze 600w 80 Plus 49amp. -Chassis: Thermaltake V100 Black Mid Tower 1. I'm running on ubuntu 18.04 LTS system. I have updated the UEFI to version P3.40 (first was P1.50, then I've installed P1.80, and then P3.40). Althought I have tried to change the memory speed to the 3200Mhz that Gskill says are tested on ryzen cpus, the system gives this information: $ sudo dmidecode --type 17 # dmidecode 3.1 Getting SMBIOS data from sysfs. SMBIOS 3.2.1 present. # SMBIOS implementations newer than version 3.1.1 are not # fully supported by this version of dmidecode. Handle 0x0015, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0014 Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM 0 Bank Locator: P0 CHANNEL A Type: DDR4 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 2133 MT/s Manufacturer: Unknown Serial Number: 00000000 Asset Tag: Not Specified Part Number: F4-3200C16-8GTZRX Rank: 1 Configured Clock Speed: 2133 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0018, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0017 Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: Unknown Set: None Locator: DIMM 1 Bank Locator: P0 CHANNEL A Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Unknown Serial Number: Unknown Asset Tag: Not Specified Part Number: Unknown Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Handle 0x001A, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0019 Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM 0 Bank Locator: P0 CHANNEL B Type: DDR4 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 2133 MT/s Manufacturer: Unknown Serial Number: 00000000 Asset Tag: Not Specified Part Number: F4-3200C16-8GTZRX Rank: 1 Configured Clock Speed: 2133 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x001D, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x001C Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: Unknown Set: None Locator: DIMM 1 Bank Locator: P0 CHANNEL BConfigured Clock Speed: 2133 MT/s Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Unknown Serial Number: Unknown Asset Tag: Not Specified Part Number: Unknown Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown How can I make it work at the desired 3200Mhz frequency? I have tried accessing the UEFI, and putting 3200 in there (there are other options, up to 4000Mhz). I haven't touched the 1.2 Voltage, should I specify another votage instead of the default 1.2V? |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
go in to uefi enable XMP it should work switching it to 3200 doesn't make it work there are timings, voltages and speed involved by setting xmp it sets those things for you
|
|
|
|
Dedalus
Newbie Joined: 29 Dec 2019 Location: Argentina Status: Offline Points: 78 |
Post Options
Thanks(0)
|
I've done that, loaded the XMP, which was in auto, and put it into profile 1. But stills showing the same information, same voltages and everything.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |