WakeOnLan not working J4205

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hardware:  [URL=https://www.asrock.com/mb/Intel/J4205-ITX/index.us.asp]J4205[/URL]

I tried to get WakeOnLAN startet, but when sending magic packages from my PC or my fritzbox (a router by avm, which can also send magic packages), the PC is still powered off.

The configuration seems ok: 

$ sudo ifconfig enp1s0
enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.35  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 2003:d1:73c:6800:dc8:cc91:3aa4:9563  prefixlen 64  scopeid 0x0<global>
        inet6 2003:d1:73c:6800:7285:c2ff:fe85:939f  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::7285:c2ff:fe85:939f  prefixlen 64  scopeid 0x20<link>
        inet6 fe80::3e59:ce76:b7f8:2e02  prefixlen 64  scopeid 0x20<link>
        inet6 2003:d1:73c:6800:bcd5:ec31:627d:379b  prefixlen 64  scopeid 0x0<global>
        inet6 2003:d1:73c:6800:4299:b7ff:831c:88fe  prefixlen 64  scopeid 0x0<global>
        inet6 2003:d1:73c:6800:259f:6ff7:959a:888b  prefixlen 64  scopeid 0x0<global>
        ether 70:85:c2:85:93:9f  txqueuelen 1000  (Ethernet)
        RX packets 2064  bytes 555524 (542.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2204  bytes 781779 (763.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

:~$ sudo ethtool enp1s0 
Settings for enp1s0:
        Supported ports: [ TP AUI BNC MII FIBRE ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: Symmetric Receive-only
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
        Link partner advertised pause frame use: Symmetric Receive-only
        Link partner advertised auto-negotiation: Yes
        Link partner advertised FEC modes: Not reported
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000033 (51)
                               drv probe ifdown ifup

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Simon90 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 May 2020 Status: Offline Points: 4	Post Options Post Reply Quote Simon90 Report Post Thanks(0) Quote Reply Topic: WakeOnLan not working J4205 Posted: 12 May 2020 at 12:04am
	Hardware: [URL=https://www.asrock.com/mb/Intel/J4205-ITX/index.us.asp]J4205[/URL] I tried to get WakeOnLAN startet, but when sending magic packages from my PC or my fritzbox (a router by avm, which can also send magic packages), the PC is still powered off. The configuration seems ok: $ sudo ifconfig enp1s0 enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.35 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 2003:d1:73c:6800:dc8:cc91:3aa4:9563 prefixlen 64 scopeid 0x0<global> inet6 2003:d1:73c:6800:7285:c2ff:fe85:939f prefixlen 64 scopeid 0x0<global> inet6 fe80::7285:c2ff:fe85:939f prefixlen 64 scopeid 0x20<link> inet6 fe80::3e59:ce76:b7f8:2e02 prefixlen 64 scopeid 0x20<link> inet6 2003:d1:73c:6800:bcd5:ec31:627d:379b prefixlen 64 scopeid 0x0<global> inet6 2003:d1:73c:6800:4299:b7ff:831c:88fe prefixlen 64 scopeid 0x0<global> inet6 2003:d1:73c:6800:259f:6ff7:959a:888b prefixlen 64 scopeid 0x0<global> ether 70:85:c2:85:93:9f txqueuelen 1000 (Ethernet) RX packets 2064 bytes 555524 (542.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2204 bytes 781779 (763.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 :~$ sudo ethtool enp1s0 Settings for enp1s0: Supported ports: [ TP AUI BNC MII FIBRE ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup

Simon90 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 May 2020 Status: Offline Points: 4	Post Options Post Reply Quote Simon90 Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 9:59pm
	How can I check if the power supply supports WOL ?

Algiux Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 24 Jun 2023 Status: Offline Points: 15	Post Options Post Reply Quote Algiux Report Post Thanks(0) Quote Reply Posted: 24 Jun 2023 at 12:51am
	Enable WOL in UEFI, go to boot, boot from lan enable