Asrock B450 Pro4 blind bios update

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I get a black screen with my Asrock B450 Pro4 mainboard until the OS (Linux in my case) initializes the graphics card (RX Vega 11 integrated with AMD Ryzen 5 2400GE). I suspect a bios update would fix it, but I can't do that without seeing what I'm doing. So what I need are the keyboard inputs required to perform a bios update blind. Can anybody help me?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
RXg8 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 15 Feb 2024 Status: Offline Points: 50	Post Options Post Reply Quote RXg8 Report Post Thanks(0) Quote Reply Topic: Asrock B450 Pro4 blind bios update Posted: 15 Feb 2024 at 2:55pm
	I get a black screen with my Asrock B450 Pro4 mainboard until the OS (Linux in my case) initializes the graphics card (RX Vega 11 integrated with AMD Ryzen 5 2400GE). I suspect a bios update would fix it, but I can't do that without seeing what I'm doing. So what I need are the keyboard inputs required to perform a bios update blind. Can anybody help me?

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 15 Feb 2024 at 4:23pm
	The issue isn't the GPU not being detected but rather the display isn't being seen before the OS loads. You can try other cables, some HDMI cables can be problematic when it comes to display detection. If you have the option you can also try the other display outputs. D-Sub (the old VGA style output) almost always works but you can also try the Display Port/HDMI depending on what you already have connected.


RXg8 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 15 Feb 2024 Status: Offline Points: 50	Post Options Post Reply Quote RXg8 Report Post Thanks(0) Quote Reply Posted: 15 Feb 2024 at 5:10pm
	I have tried HDMI, DisplayPort and D-Sub cables, it doesn't seem to make a difference. It's not that there's no signal (my monitor detects a signal) it's just that it's a black screen. Interestingly, my SATA Controller Card's (SilverStone ECS06) BIOS does get displayed for some reason; but BIOS and bootloader (GRUB) show a black screen.

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793	Post Options Post Reply Quote Xaltar Report Post Thanks(1) Quote Reply Posted: 15 Feb 2024 at 5:22pm
	That is odd, if the OPROM is showing that should mean it's working. Have you tried doing a CMOS clear? If not I would do that, I find this method works best to clear out gremlins and bad config info a typical clear doesn't seem to quite remove: https://forum.asrock.com/forum_posts.asp?TID=630&title=how-to-clear-cmos-via-battery-removal If that doesn't resolve the issue then I would open a ticket with ASRock: https://tw.asrock.com/events/tsd.asp You can include a link to this thread so they can check it out. Good luck


RXg8 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 15 Feb 2024 Status: Offline Points: 50	Post Options Post Reply Quote RXg8 Report Post Thanks(0) Quote Reply Posted: 15 Feb 2024 at 8:08pm
	Clearing the CMOS worked, thanks!