|
Z77 Extreme 4 NVME PCI-E SSD BOOTING! |
Post Reply 
|
Page 123 6> |
| Author | |
SyncroSeb 
Newbie 
Joined: 16 May 2024 Location: Germany Status: Offline Points: 30 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Z77 Extreme 4 NVME PCI-E SSD BOOTING!Posted: 16 May 2024 at 3:21pm |
|
Or if you trust me use my version: https://drive.google.com/drive/folders/1VXoaUOu4OUqEYoRefY76v4rfORflBXx_?usp=drive_link btw. got myself booting Windows 10 LTSC to Desktop in 9 seconds. |
|
 |
|
|
SyncroSeb
Newbie
Joined: 16 May 2024 Location: Germany Status: Offline Points: 30 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 May 2024 at 7:46am |
|
For anyone trying to get this old motherboard running witha NVME:
I doesnt have to be a Samsung Evo 9XX or anything. Try this instead, worked out perfektly for me using the 2.90P Bios with an old NVME taken from a Lenovo C340 (without any boot option like the Samsung) and the cheapest adapter from Aliexpress. https://www.youtube.com/watch?v=sxX0RtX5e6g Written down and more advanced check this site: https://winraid.level1techs.com/t/howto-get-full-nvme-support-for-all-systems-with-an-ami-uefi-bios/30901 Rename the Bios to *.rom to change it, rename it afterwards back and put it to an Fat32 USB Stick, then use the instant flash with F6 at start. The Asrock Bios is dumb enough to not recognize th changed BIOS |
|
|
|
|
Bugstomper
Newbie
Joined: 19 Jun 2021 Location: California Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Jun 2021 at 12:02am |
|
Ploink,
Thank you taking the time to post your experience. I am a late adapter and recent post inspired me. Unfortunately, I presently dual boot with XP and must boot Win 10 in MBR, giving me fits or making it impossible to boot to NVMe drive. What is the name of the device you boot to in the firmware settings? |
|
|
|
|
ploink
Newbie
Joined: 19 Apr 2021 Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2021 at 9:41pm |
|
You can boot Windows from NVME on any 64bit mainboard without NVME support if you install the rEFIind boot manager with the NvmExpressDxe.efi driver on usb stick and boot it. Refind can then chainload windows or any other OS you have installed.
That said, I installed the NVME on a z77 Extreme 4 mainboard without needing the usb stick solution. This is what I did. - Flash the 2.90P beta Bios. - Install the NVME hardware - Boot into windows to let it install the driver and check that nvme works. - Convert the windows boot disk to GPT (in case it is MBR). - Disable CSM in Bios/firmware setup (in Advanced->ACPI configuration). You should never need it again as the system is now GPT. - Install the free version of Macrium Reflect and clone the entire boot disk to NVME. Note it is possible to resize the windows partition while cloning to fill the disk, but every time I try, I have to work out how to do that. Reflect is not very intuitive with this. - After the clone, SHUTDOWN and unplug mains. DO NOT REBOOT until you have physically disconnected the old boot disk. Having two clones of the same OS during boot can seriously confuse windows. I am not 100% sure the GPT/CSM steps are required, but it worked for me. |
|
|
|
|
moxie2020
Newbie
Joined: 03 Apr 2021 Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2021 at 12:32pm |
|
pre-modified BIOS where££
|
|
|
|
|
crileo
Newbie
Joined: 30 Mar 2021 Location: Italy Status: Offline Points: 30 |
Post Options
Thanks(1)
Quote Reply
Posted: 31 Mar 2021 at 12:49pm |
|
Hello ZAZZN, I'm interested to your mod bios but I cannot see your link for downloading....can you help me£
|
|
|
|
|
rockherbie
Newbie
Joined: 15 Mar 2021 Location: Germany Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 15 Mar 2021 at 11:08pm |
|
Hi guys, I use a Z77 Extreme 4M(the small brother to the Extreme 4) and installed a NVME PCI-E SSD with an adapter in the PCI e 3.0 slot these days. No problem with the installing process. Windows 10 pro shows this as regular drive and I can use it as data storage. On the other hand the Bios doesn`t show the NVME drive (which is due to the missing NVme element) and I can`t therefore boot from it. It was interesting to see that for the Extreme 4 Bios there is a NVME part included already - so my questions are:
Is there a solution for the Extreme 4M - the actual Bios version is 1.90£ Can I possibly use the Extreme 4 Bios on my board - since both boards are very similar£ Can an expert possibly modify the 1.90 Bios that I can use my NVME ssd for booting£ Thank you- |
|
|
|
|
B-Man
Newbie
Joined: 26 Nov 2018 Status: Offline Points: 10 |
Post Options
Thanks(1)
Quote Reply
Posted: 17 Jun 2020 at 12:00pm |
|
2.90Q I Meant. The 3.00 disnt show my nvme drive.
Just keep trying sonething until it works |
|
|
|
|
B-Man
Newbie
Joined: 26 Nov 2018 Status: Offline Points: 10 |
Post Options
Thanks(1)
Quote Reply
Posted: 17 Jun 2020 at 11:54am |
|
2.90p was the only one that worked for me
|
|
|
|
|
drakon8000
Newbie
Joined: 17 Jun 2020 Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 Jun 2020 at 12:38am |
|
latest Bios P3.0 3/12/2018 support NVME ?
or need only Bios version 2.90P |
|
|
|
|
Post Reply
|
Page 123 6> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options