x399 Wont Post |
Post Reply |
Author | |
testUser001
Newbie Joined: 23 Dec 2017 Location: OK Status: Offline Points: 5 |
Post Options
Thanks(0)
Posted: 23 Dec 2017 at 10:53am |
Just finish building this pc, but it wont post. The video card turns on, the radiator turns on, but no fans turn on (other than the video cards). Dr Debug goes through a few numbers then eventually stops on 65 the chipset initialization error. I have tried booting with a ram stick in A2, two sticks in A2 B2, and 4 sticks A2 B2 C2 D2 all with the same result.
|
|
testUser001
Newbie Joined: 23 Dec 2017 Location: OK Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Ram is Gskill TridentZ f4-3200c14d-16gtzkw
I unplugged the hard drives and got the same result.
|
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
testUser001, here is a link to the debug codes: http://forum.hwbot.org/showthread.php?t=16017
65 - CPU DXE initialization (CPU module specific) I would suggest you carefully check your CPU installation. Make sure the 4-pin and the 8-pin CPU power connectors are connected properly (not rotated) and that the connectors are CPU and not PCIe. It is hard to make much further guesses with so little information. Please post all your specifications in your signature as I have including BIOS version. If you can boot into BIOS, please hit F9 then F10. Enjoy, John. |
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
testUser001
Newbie Joined: 23 Dec 2017 Location: OK Status: Offline Points: 5 |
Post Options
Thanks(0)
|
I solved the issue already, it was my cpu fan pin connector not being pushed in all the way.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |