Issue With EVGA RTX 2070 & EP2C612-WS

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   AN UPDATE: Problem Resolved

It turns out the problem was the monitor. 
A QNIX QX2710LED, first generation.
It simply didn't like the output from the 2070.
I tested the card in 3 other machines and all was well.
When I changed out the monitor on my EP2C612-WS all was well.
Ordered a new monitor last night.

Thanks for your time.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
stickfigure Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 17 Feb 2019 Location: NC/VA Status: Offline Points: 4	Post Options Post Reply Quote stickfigure Report Post Thanks(0) Quote Reply Topic: Issue With EVGA RTX 2070 & EP2C612-WS Posted: 19 Feb 2019 at 2:10am
	AN UPDATE: Problem Resolved It turns out the problem was the monitor. A QNIX QX2710LED, first generation. It simply didn't like the output from the 2070. I tested the card in 3 other machines and all was well. When I changed out the monitor on my EP2C612-WS all was well. Ordered a new monitor last night. Thanks for your time.

stickfigure Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 17 Feb 2019 Location: NC/VA Status: Offline Points: 4	Post Options Post Reply Quote stickfigure Report Post Thanks(0) Quote Reply Posted: 17 Feb 2019 at 2:38am
	Hi. First post on this forum. My System: EP2C612 WS QX2710 LED monitor 2 x E5-2630 v4 128 GB RAM 1200W PSU Win 10 PRO Currently I am using an EVGA GTX 1080 ti graphics card that has worked perfectly since I installed it in 2017. I have been trying to upgrade to an EVGA RTX 2070. Here's the problem: When I install the 2070 the system boots, you can hear the Win 10 boot chime, but all you see is a full screen that starts white then goes to black then to red then green and then blue and repeats. The 2070 connects to the monitor via an included HDMI-DVID adapter cable. I have the 1080 installed in PCIE slot 7, set in BIOS to Gen 3, X16 and all works well. But I get the above result when I install the 2070 in the same slot. An Important Note: I have a system set up using the EP2C602 MOBO that normally uses an EVGA 980 ti. When I replace the 980 with the 2070 it boots right up with no problems. Any thoughts from anybody?