Asrock Z97 Extreme6 and TPM2-S module

Can you send me the file again? link is lost!! PLEASE!!

This seems to have worked for me too. Thanks for sharing! I was stuck on a particular old Win11 Insider build because their policy changed and none of the cumulative updates would install properly any more without finding a TPM.

Installing a TPM2-S, using this BIOS, and then doing an in-place Win11 install of a newer build got me working and back on the update flow again. Yay! I'd tried doing an in-place install before but it wouldn't work without finding a TPM.

Thanks!

I have same problem with ASRock Extreme6 MB (running 2.80 BIOS) and TPM2-S module. After installation, Win 10 (64 bit) says "Compatible TPM cannot be found on this computer. Verify that this computer has a 1.2 TPM or later and it is turned on in the BIOS."   I have reinstalled the TPM several times and no iteration of BIOS setting in the Advanced\Trusting Computing screen seems to work. I have removed the TPM and set the Auto Detect Security Device to "Disabled", rebooted, then shutdown the PC. I then installed the TPM, rebooted, and the Advanced\Trusting Computing screen now shows the Auto Detect Security Device has been "Enabled" but the message below Current Status Information says "SUPPORT TURNED OFF". And Win 10 still says TPM not found. No matter what BIOS sequence I use to boot up, I cannot get the system to recognize the TPM. The 2.80 BIOS is the latest version offered by ASRock and does not fix the problem.    

I have emailed ASRock Technical Support on 3 separate occasions regarding the issue and still do not have a reply...frustrating.

I have seen similar TPM issues with other ASRock MB's where ASRock support sent them a BIOS fix. I would like to know if I have the wrong type of TPM or if I need a BIOS fix.

Thanks