DeskMini 310W does not start

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Just bought an ASrock Deskmini 310W barebones system. It has BIOS sticker P4.40. I installed stock wi-fi card, 500 GB SDD, intel CPU i9400 with fan, and DDR4 8GB X2. On connecting the power, the blue LED comes on and the fan starts but no display. My Display says "No signal". frustrated. Please help

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
RakeshNY Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 May 2020 Location: USA Status: Offline Points: 5	Post Options Post Reply Quote RakeshNY Report Post Thanks(0) Quote Reply Topic: DeskMini 310W does not start Posted: 10 May 2020 at 3:51am
	Just bought an ASrock Deskmini 310W barebones system. It has BIOS sticker P4.40. I installed stock wi-fi card, 500 GB SDD, intel CPU i9400 with fan, and DDR4 8GB X2. On connecting the power, the blue LED comes on and the fan starts but no display. My Display says "No signal". frustrated. Please help

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 11 May 2020 at 10:58am
	Dear RakeshNY, Thank you for posting your query to the ASRock forum. Could you kindly check if you have 9400 CPU without the letter "F"? Also, try to install only one RAM to a different slot to see if it will work. If it doesn't work: 1. Try to install only the CPU, CPU fan, one RAM to the system. 2. Double-check if monitor and monitor cable can work properly. With thanks, ASRock TSD

RakeshNY Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 May 2020 Location: USA Status: Offline Points: 5	Post Options Post Reply Quote RakeshNY Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 5:49am
	Hello ASRock TSD Thanks for your response. I confirm that my CPU is i9400 (not 9400F). I switched on with only the CPU and RAM in one slot. Nothing happened. Then I tried again after switching the RAM to another slot. This time I got an output on the monitor with four options: F2 or Del to run UFI etc. However,none of the options work. When the system is started the keyboard shows in numlock status and there is no cursor to use the mouse. With RAMs in both slots, the screen remains black. What to do from here?

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 10:44am
	Dear RakeshNY, Thanks for the reply. Try using a different RAM on the slot that can allow the system to boot up. (Please make sure that all of the other storage devices are removed from the system.) If the system still cannot boot into the BIOS, keep pressing the F2 button right after the power key is pressed. With thanks, ASRock TSD Edited by ASRock_TSD - 12 May 2020 at 10:47am

RakeshNY Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 May 2020 Location: USA Status: Offline Points: 5	Post Options Post Reply Quote RakeshNY Report Post Thanks(0) Quote Reply Posted: 18 May 2020 at 7:26am
	I tried with a different RAM - same result. I see the BIOS options with can't get into bios even after repeatedly pressing F2 or del. and if I use both the slots for RAM, the display is black. Totally frustrated! Can ANYONE help?

kustode79 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Jun 2020 Location: Rome Status: Offline Points: 4	Post Options Post Reply Quote kustode79 Report Post Thanks(0) Quote Reply Posted: 21 Jun 2020 at 6:10pm
	I have a very similar problem. I have AsRock A310 with I7-9700 (suggested by Asrock). No signal :(

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 23 Jun 2020 at 4:25pm
	Dear RakeshNY and Kustode79, Sorry for the late reply. Please check the following link for the information which shows the BIOS version that will support the CPU that is being used. https://www.asrock.com/nettop/Intel/DeskMini%20310%20Series/#CPU Also, kindly check if the memory modules used on in the support list: https://www.asrock.com/nettop/avl/DeskMini%20310%20Series.pdf If the memory modules are not in the support list, kindly check with the RAM vendor to see if the RAM has been tested with H310 desk mini. Also, try to reinstall the CPU and install only one RAM to see if the system will boot up. With thanks, ASRock TSD

rickaccused Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Jan 2021 Status: Offline Points: 18	Post Options Post Reply Quote rickaccused Report Post Thanks(0) Quote Reply Posted: 05 Jan 2021 at 11:15pm
	Same problem as listed above, none of these suggestions work. Processor - Intel Core i5-9400F Coffee Lake 6-Core 2.9 GHz (4.1 GHz Turbo) LGA 1151 (300 Series) 65W BX80684I59400F Desktop Processor Without Graphics Memory - G.SKILL Ripjaws Series 16GB (2 x 8GB) 260-Pin DDR4 SO-DIMM DDR4 2666 (PC4 21300) Laptop Memory Model F4-2666C18D-16GRS SSD - WD Blue 3D NAND 250GB Internal SSD - SATA III 6Gb/s 2.5"/7mm Solid State Drive When I plug in and press the power button, the blue light illuminates but no signal to the monitor. Bios Version on the Motherboard is listed as 4.40. I am noticing that my processor is the i9400F rather than just the i9400 (no F). Not sure if that means anything.

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 05 Jan 2021 at 11:55pm
	You can't use that CPU in a DeskMini, the "F" on the end signifies no integrated graphics (iGPU). The DeskMini does not support CPUs that do not have integrated graphics, there is basically no GPU in your system and nowhere to connect one.


rickaccused Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Jan 2021 Status: Offline Points: 18	Post Options Post Reply Quote rickaccused Report Post Thanks(0) Quote Reply Posted: 06 Jan 2021 at 12:13am
	Thanks Xaltar for the quick answer. That's pretty damn annoying. This will be the second processor I have to return for this computer. Each time taking a 15% restocking fee hit. It looked like this one was on the supported processors list but I guess it wasn't. Listing this information on the front end would be a good move by ASRock. Guess I need to read the fine print a little closer.