ASRock AB350 Pro4 no video output

crayzcrinx wrote: wardog wrote: [QUOTE=crayzcrinx] Jackpot. https://www.asrock.com/mb/AMD/AB350%20Pro4/#CPU I found that page, it's got AMD 2200g on the list, so it should be compatible? After all, it's AM4, the motherboard is AM4 compatible?

sigh.this gets harder by the day

pssstttt, 2200G line, look to the far right column

crayzcrinx wrote: wardog wrote: Did the MB box come with a "2000 Ready' sticker on the outside? Directly above PCIE1, there is a sticker over the BIOS chip. What is displayed on the sticker? Theres no "2000 ready" sticker on the mobo box. The bios battery has CR2032 Newsun Lithium Battery. The "bios rom" chip has P3.30 written on it.

Jackpot.

https://www.asrock.com/mb/AMD/AB350%20Pro4/#CPU

crayzcrinx wrote: I've additional information. All the signs are pointing towards the memory. However, I have now also tried booting with no memory. It doesn't appear to make any difference, so the memory is not the problem. The power turns off still, so that literally leaves three components... the mobo, the CPU or the PSU. The PSU is fine, and the other pieces are new. But from extensive googling, I found that someone found their CPU cooler was not on correctly, when screwing in my standard wraith cooler, I got these incredibly loud clicking noises and was not really sure if the screws were in all the way or I was about to break something, however, I've just watched this video: (skip to the 5th minute) https://www.youtube.com/watch?v=9VtH0EJRyAc And the guy screws in his cooler, and there are no loud clicks at all. Has anyone else observed this behavior?

Get yourself a MB speaker You need one on it to diagnose.

I want to know if the beeps change with and w/o mem installed.

.

I've additional information. All the signs are pointing towards the memory. However, I have now also tried booting with no memory. It doesn't appear to make any difference, so the memory is not the problem. The power turns off still, so that literally leaves three components... the mobo, the CPU or the PSU. The PSU is fine, and the other pieces are new. But from extensive googling, I found that someone found their CPU cooler was not on correctly, when screwing in my standard wraith cooler, I got these incredibly loud clicking noises and was not really sure if the screws were in all the way or I was about to break something, however, I've just watched this video: (skip to the 5th minute)

https://www.youtube.com/watch?v=9VtH0EJRyAc

And the guy screws in his cooler, and there are no loud clicks at all. Has anyone else observed this behavior?

To be honest - it sounds like you don't have the RAM plugged in completely. Same thing happened to me when I built my machine using this board and it exhibited the exact same behavior. Make sure that your RAM is FIRMLY installed in the slot (you do actually have to apply a decent amount of pressure until it clicks into place)