No Boot / No Image 2

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello all,
My son & I are building a new PC
With the MB,CPU, & RAM installed, Power on the PC.
We get lights, & fans.
But no beeps or HDMI / VGA video to any monitor we connect.
The monitor is on and only says "No Signal"

Per email from ASRock Support we ran through multiple tests.
And received a RMA to replace the MB.
We replaced the MB with the new new one they sent, but, we have the exact same issue.

I saw another post that said to try 1 stick RAM
And try remove / replace the CMOS Battery
I tried both
I re-seated the CPU, and the HDMI cable ends.
--No change.

Any other ideas??

We have the 
ASRockB450M-HDV R4.0 MB
AMD RZEN 3 3200G with Radeon Vega 8 Graphics CPU
2 sticks Corsair Vengeance LPX DDR4 8GB RAM 3200MHz
and a PCI WiFi card (I left this out during tests)

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
PapaGus Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 16 May 2020 Location: USA Status: Offline Points: 3	Post Options Post Reply Quote PapaGus Report Post Thanks(0) Quote Reply Topic: No Boot / No Image 2 Posted: 16 May 2020 at 8:59am
	Hello all, My son & I are building a new PC With the MB,CPU, & RAM installed, Power on the PC. We get lights, & fans. But no beeps or HDMI / VGA video to any monitor we connect. The monitor is on and only says "No Signal" Per email from ASRock Support we ran through multiple tests. And received a RMA to replace the MB. We replaced the MB with the new new one they sent, but, we have the exact same issue. I saw another post that said to try 1 stick RAM And try remove / replace the CMOS Battery I tried both I re-seated the CPU, and the HDMI cable ends. --No change. Any other ideas?? We have the ASRockB450M-HDV R4.0 MB AMD RZEN 3 3200G with Radeon Vega 8 Graphics CPU 2 sticks Corsair Vengeance LPX DDR4 8GB RAM 3200MHz and a PCI WiFi card (I left this out during tests)
	Thank You for your help PapaGus & Sons

cclim Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 06 Sep 2020 Status: Offline Points: 3	Post Options Post Reply Quote cclim Report Post Thanks(0) Quote Reply Posted: 12 Sep 2020 at 6:31pm
	Hi, try single ram per slot until you can boot in BIOS, THEN Set dram speed from auto to "2400".My case same exactly yours and i solved it by this method. Try it.