Polychrome not detecting 5700 XT GPU

I have a phantom gaming d 5700xt. a few weeks ago polychrome decided that it no longer wanted to recognize the gpu, so i cannot change the rgb color. The rgb is currently stuck on green, which i believe is the beginning of the stock rainbow waive, but its not moving.

I have done 2 fresh installs of windows, and updated polychrome to the most recent beta on the asrock support page for my motherboard (b550 pg velocita) since it is more recent than the copy on the support page for the gpu. GPU page has 1.0.13. Motherboard page has 2.0.94. I have updated to the most recent bios for the motherboard (1.90), and the issue started around the time i made that update

ASRock_TSD wrote: Dear Apc01352, Thank you for posting your query to the ASRock forum. Regarding your question, kindly refer to the following: 1. Boot up the system and install the graphics card driver. 2. Download the following tool and unzip it.    https://download.asrock.com/TSD/Desktop/RGBFW/GPU/RX5700XT_PGD.zip 3. Run command prompt as Administrator. 4. Run the update tool by typing "Update_RX5700_PG.cmd" 5. The update process may take a while. 6. When the message "Update Pass" shows up, it means that the graphics card firmware has been flashed successfully. 7. Please turn on the RGB software and check if the RGB can be controlled properly.    https://download.asrock.com/Utility/RGB/PolychromeRGB(v2.0.94).zip With thanks, ASRock TSD

This worked, Thank you! Just a quick note, you have to open the file location in CMD before typing in the prompt to update

Same thing happens to my rx 5500 xt PG and I cant find any fix :(

Blitzeno wrote: Same thing happens to my rx 5500 xt PG, I launch polychrome and it always gets stuck in green and I cant find any fix, can anything be done for my situation?

What worked out for my 5600 XT was deleting all the software related to RGB devices.
(Razer software, Ballistix MOD, turns out Samsung Magician software can also be an issue if you have that installed)
I then followed the same steps that are listed above, same driver eventho its not for my card, but it worked.

Hey I have the same problem and tried this fix but it says every time I do this fix it gives me this message with a big (Update Fail).
=================================================================
              ASRock ISP Tool v1.0.10.2 Built: 20210310
        (C)2019 ASRock Incorporation. All Rights Reserved
=================================================================
WARNING! PLEASE DON'T STOP THIS PROGRAM DURING FIRMWARE UPDATING.

[ Configuration ]
Program Interface ...... ADL_I2C_OEM
Adapter ................ AMD Radeon RX 5700 XT

[ Chip - Current]
FW Version ............. 0x00000000
FW Release ............. 0x00000000
FW Feature ............. 0x00000000
HW Version ............. 0x00000000
Device ID .............. 0x00000000
Flash Mode ............. Unknown (0x00)
Config0 : Config1 ...... 0x0019FDB4 : 0x0019FD37

Jump to LDROM                     [ Fail ]
Process Time                      [ 0.019 seconds ]
*************************
       Update Fail
*************************
Any help could be appreciated.