CPU Compatibilty List |
Post Reply | Page <1 2345> |
Author | ||||||
DTingman
Groupie Joined: 04 Nov 2022 Location: RI USA Status: Offline Points: 315 |
Post Options
Thanks(0)
|
|||||
Yes eccential, it boots fine but crashes while gaming at 1.35v.
|
||||||
DTingman
Groupie Joined: 04 Nov 2022 Location: RI USA Status: Offline Points: 315 |
Post Options
Thanks(0)
|
|||||
Tried another set of what was locally available RAM this afternoon, a set of 2x16 loosely timed Corsair 3200's. Same problem. Booted up, but crashed quickly before MSFS even started. Got to be the memory controller...
|
||||||
DTingman
Groupie Joined: 04 Nov 2022 Location: RI USA Status: Offline Points: 315 |
Post Options
Thanks(0)
|
|||||
Best I can get so far to run stable is 2800 at 1.28V while using the XMP Profile timings of 16-18-18-36-54. Anybody have any suggestions?
|
||||||
DTingman
Groupie Joined: 04 Nov 2022 Location: RI USA Status: Offline Points: 315 |
Post Options
Thanks(0)
|
|||||
To update, my A320m HDV Rev4 Bios 7.2 now seems to be running stably with my now 2x16 Corsair memory at 2993. My Ryzen 5 5600 is starting to cooperate as well.
|
||||||
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 24653 |
Post Options
Thanks(0)
|
|||||
Thanks for the update DTingman.
|
||||||
|
||||||
DTingman
Groupie Joined: 04 Nov 2022 Location: RI USA Status: Offline Points: 315 |
Post Options
Thanks(0)
|
|||||
Had a crash while gaming today so I lowered my Ram Speed to 2867 and it's voltage to 1.28. Running stably while gaming so far. Higher speeds and or volts crash. The inexpensive and locally available Corsair 2x16's are already loosely timed but I'd love them to get up to their XMP rated speed of 3200. Any suggestions on how to get more out of these? These are my zentimings:
https://imgur.com/n9NDTVu |
||||||
cx5
Senior Member Joined: 15 Sep 2017 Location: Hong Kong Status: Offline Points: 2398 |
Post Options
Thanks(0)
|
|||||
OK, this is a good start, next please show us the zentiming when you manage to boot into windows running 2933. We need to check many other things when it is in 2933 to find out what crash. |
||||||
x370taichi@3.50gen4
AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |
||||||
DTingman
Groupie Joined: 04 Nov 2022 Location: RI USA Status: Offline Points: 315 |
Post Options
Thanks(0)
|
|||||
Hey again cx. Windows wouldn't fully load with 2933 @ 1.28V so I upped it to 1.29V.
Below are the new zentimings. https://imgur.com/w7Ynfad |
||||||
cx5
Senior Member Joined: 15 Sep 2017 Location: Hong Kong Status: Offline Points: 2398 |
Post Options
Thanks(0)
|
|||||
OK your problem is ASRock's bios didn't setup the many correct voltageseses for you.... Hence now you will need to set them manually. I already given LINKS and replies to you regarding the voltages that you need, did you not read them? Or you didn't understand them? >OK fine, so I highlight them to you again. >>Please make sure to read them this time and compare to your zentiming screen capture the many parameterssss. FIRST REPLY _________________________________________________ Posted: 07 Nov 2022 at 2:58pm
giving the impression you understand secondaries timing - means should have enough skill to understand the other parameters too (including voltageseseseses), but I'm surprised you didn't see all the voltageses required??? On Posted: 09 Nov 2022 at 9:27am
everything is written to you in above, did you not read it? or which/what part you don't understand? >>>>>>> try 1.4v dram <<<<<<<< why didn't you do this ???? _____________________________________ even @eccential told you to run 1.35v but why don't you run it???? Posted: 12 Nov 2022 at 9:25pm
___________________________________ and you replied
because you didn't set ALL the OTHER voltagesESESEES hence crash. which I've repeatedly given you in above links and written text. Hope you realized and manages to catch them this time. |
||||||
x370taichi@3.50gen4
AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |
||||||
DTingman
Groupie Joined: 04 Nov 2022 Location: RI USA Status: Offline Points: 315 |
Post Options
Thanks(0)
|
|||||
Ok, I had tried those voltages with my first set of memory and it didn't help so I had left them on Auto on this new set of 2x16's, which so far I've done slightly better with on speeds. The secondary timings are there. I've now updated to the recommended voltages. It now crashes before a game(MSFS) fully loads. These are the updated zentimings. I also tried running the memory at 1.4V and that crashed even sooner. If I missed any settings let me know.
https://imgur.com/a/OB4Dq6L |
||||||
Post Reply | Page <1 2345> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |