Trouble with Recognizing USB-C Devices on ASRock T |
Post Reply |
Author | |
pangeng
Newbie Joined: 28 Jul 2023 Status: Offline Points: 160 |
Post Options
Thanks(0)
Posted: 31 Aug 2023 at 8:50am |
Hello ASRock Community,
I recently purchased an ASRock TB 4 AIC R2.0 card and installed it on August 4th. I don't have any Thunderbolt 4 devices to test its functionality, so I used the USB-C devices I have on hand. However, I'm facing an issue where none of the devices are recognized by my PC when connected to the AIC card. The same devices work perfectly when plugged into the USB-C port on my PC's chassis. - Devices Tested: LaCie Rugged Thunderbolt USB-C 4TB (via USB-C cable) SanDisk Extreme Portable SSD (via USB-C cable) Apple Magic Trackpad 2 (via Lightning to USB-C cable) - Software and Controller Status: Downloaded and installed "Thunderbolt (TM) Controller software ver: Rev86_3" from the ASRock TB 4 AIC R2.0 website. Thunderbolt (TM) Controller software displays the following information: Thunderbolt Software: Application version: 1.0.34.0 Controller driver version: 1.41.1325.0 PCIe Tunneling: Enabled Thunderbolt Controller 1: Thunderbolt generation: thunderbolt 4 (1137) number of ports: 2 security level: no security (SL0) NVM Firmware version: 35.0 - Device Manager: No errors reported. - PC Configuration: OS: Windows 10 Pro 22H2 CPU: AMD 7800X3D Memory: 64GB Corsair Vengeance Graphics: ASRock 7900XT PG Storage: WD Black 4TB SN850X, WD Blue 510 4TB SATA SSD Motherboard: ASRock x670e PG Lighting AIC Card Slot: Plugged into PCIe #3 as per manual instructions Jumper: Connected as indicated in the AIC manual Internal Cables: Thunderbolt and USB cables connected according to the AIC manual Has anyone encountered this issue or can offer some troubleshooting advice? |
|
pangeng
Newbie Joined: 28 Jul 2023 Status: Offline Points: 160 |
Post Options
Thanks(0)
|
Title did not disply fully. It is:
Trouble with Recognizing USB-C Devices on ASRock Thunderbolt 4 AIC R2.0 |
|
pangeng
Newbie Joined: 28 Jul 2023 Status: Offline Points: 160 |
Post Options
Thanks(0)
|
update: problem fixed.
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24308 |
Post Options
Thanks(0)
|
Thanks for the update pangeng. Enjoy the build
|
|
|
|
pangeng
Newbie Joined: 28 Jul 2023 Status: Offline Points: 160 |
Post Options
Thanks(0)
|
Thank you
|
|
GoBucks2023
Newbie Joined: 25 Sep 2023 Location: Indianapolis Status: Offline Points: 30 |
Post Options
Thanks(0)
|
I'm having the same issue with my ASRock TB4 AIC coupled with a B660 Pro RS MB. I first found Pangeng's thread about this on the Tom's Hardware forum. They helpfully responded to my request for details on how they fixed the issue and said that the USB 2 header was not connected properly. I've double checked my setup and it appears that both my TB header and USB 2 header are indeed connected properly. Any ideas what the issue may be? Device manager shows the AIC is working properly, but USB C devices are not recognized. I've tried a couple of different external SSDs, as well as my phone, and while the devices receive power, there is no data connection, and no devices show as connected in the TB manager software.
|
|
GoBucks2023
Newbie Joined: 25 Sep 2023 Location: Indianapolis Status: Offline Points: 30 |
Post Options
Thanks(0)
|
Fixed it - classic ID 10 T error on my part.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |