[solved] B650M/HDV.M2 BIOS memory stability issues |
Post Reply | Page <12 |
Author | |
mrbill
Groupie Joined: 07 Jan 2023 Status: Offline Points: 560 |
Post Options
Thanks(0)
|
I was finally able to get it to train (screen was black for a few minutes during training). After training, RAM was set to 4800 by MB despite my initial efforts to train to 5200. Windows was unstable at 4800 and would crash after a minute or two (see pic). So I had to rollback again to FW 1.30 AS05
I was an early adopter with the MB, which is why all components in this system are QVL supported. Using QVL supported Gskill memory, there should be no need to train memory anyway. To say this is frustrating is an unederstatement - I've been down this path before with a much older FW. Then I had opened up a support case and ASRock never responded. Not sure if I'll waste my time again because ASRock doesn't appear to test their FW against what they recommend on the QVL anyway. This will be the last ASRock MB I purchase and at work I will deny the purchase of any workstations configured with an ASRock MB due to their poor support. |
|
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X 32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K WD SN570 2TB MSI NVIDIA GeForce RTX 3080 Ti Win 11 Pro |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24758 |
Post Options
Thanks(0)
|
RAM support is a tricky beast, particularly since the IMC is located on the CPU
on modern CPUs. This means any change to the IMC or a CPU quality issue adversely effects RAM compatibility. Another major issue is that RAM manufacturers will often change the components of a particular model of RAM without warning or notification. It's not uncommon to see 2 RAM modules of the same model number have completely different physical RAM chips on them. So long as the RAM chips meet the technical specs of the model they will change them (usually due to availability issues). I am sure you can guess that this also hurts compatibility. Fairly often, unless you are seeing a lot of other people with your board model reporting the same issue, the problem is coming from the CPU not the actual board. I have a brand new out the box 3600 that never worked with anything over JEDEC speeds on any board I have tried it in. It's memory controller was borderline bad right out the box. Unfortunately it had been sitting on a shelf for over a year before I tested it so I missed my return window and AMD refused an RMA citing that it worked as intended at it's rated RAM speeds. As I said in response to your reply in essential's thread, make sure your support ticket went through and that you received the automated confirmation email. |
|
|
|
mrbill
Groupie Joined: 07 Jan 2023 Status: Offline Points: 560 |
Post Options
Thanks(0)
|
@Xaltar
Thanks for your response. FW 3.01.AS01 was released so I tried that with the same result - Windows crashes before loading so I'm back on 1.30.AS05 which is six FW updates earlier. I ran into a similar problem a while back, but they corrected it on their own with a future FW update. I suspect the reason why there aren't many others reporting similar problems is because they are using different RAM or are just like I've been which is not reporting a problem for five FW updates. Regardless, I did submit a support request and did receive an email acknowledgement from them. So we will see if/when they do respond. Have a good weekend. |
|
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X 32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K WD SN570 2TB MSI NVIDIA GeForce RTX 3080 Ti Win 11 Pro |
|
mrbill
Groupie Joined: 07 Jan 2023 Status: Offline Points: 560 |
Post Options
Thanks(0)
|
Just a follow-up on this. Received a response to my support ticket from Eric (USA). Asked if I tried different USB drives to update the FW, which I did and works just fine when rolling back to 1.30 AS05. He also sent a pic stating they recommend not updating FW if it's working ok. Problem is the LogoFAIL vulnerability exists in this FW, which I pointed out to him on August 29, 2024. I've received no response back. Not thrilled I'm running a MB with old FW that can't be updated to address security vulnerabilities.
|
|
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X 32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K WD SN570 2TB MSI NVIDIA GeForce RTX 3080 Ti Win 11 Pro |
|
TairikuOkami
Newbie Joined: 30 Aug 2024 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
So this issue will never get fixed?! I had to RMA the first motherboard, the second one suffers from this.
The second one actually came with 3.01, after updating it to 3.06, RAM speed can not be changed and on top of it, it breaks restart/shutdown, reverting changes does nothing, I have to reflash BIOS to get it working again. RAM works just fine at 4800 CL40 though. I am glad I did buy a faster one, it would be waste of money. |
|
Seasonic Core GM 550 Gold
AMD Ryzen 5 8600G ASROCK B650M-HDV/M.2 3.06 ASROCK Radeon RX 6600 8G Kingston FURY 2x32GB DDR5 5600 MHz CL36 Kingston KC3000 NVMe 2TB Windows 11 Home 24H2 |
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |