![]() |
AB350M Pro 4 Freeze in reboot |
Post Reply ![]() |
Page <123 |
Author | |
nikoff90 ![]() Newbie ![]() Joined: 27 Dec 2017 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
![]() |
|
zlobster ![]() Groupie ![]() Joined: 02 Sep 2017 Status: Offline Points: 403 |
![]() ![]() ![]() ![]() ![]() |
The same nasty USB cr@p the rest of the guys here are getting! PERSONAL OPINION: judging by the sheer amounts of similar complaints for this board, I think it should never existed in first place. This board looks like some garage engineers did a side project for ASRock in their spare time... Alas, other guys' issues like these are still unresolved. ![]() You could try UEFI re-flash and CMOS resets but ultimately I think this one is beyond our ability to fix. My opinion again, it may not be what you're looking for but at least it's honest - swap this board for another brand. Do some reading in advance, just to make sure you don't end up with a similar stuff. Option 2: RMA this board as many times it takes until you get working one. |
|
1700X ZP-B1 (stock); X370 Taichi (UEFI 3.10); 16GB F4-3200C14-8GFX XMP; 256GB 960 EVO; RX 580 NITRO+ 8GB
|
|
![]() |
|
nikoff90 ![]() Newbie ![]() Joined: 27 Dec 2017 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
SSD M.2 in the one closet to CPU.
PSU is new, no issues running in windows except for restart. Edited by nikoff90 - 28 Dec 2017 at 3:01am |
|
![]() |
|
nikoff90 ![]() Newbie ![]() Joined: 27 Dec 2017 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
Debian Linux is crashing also, I get this in logs not at crash but sometime before and it's consistent.
Last thing in log before crash, not at the time of crash though but some time before.
Dec 26 10:55:29 debian kernel: [ 1898.911887] INVALID_DEVICE_REQUEST device=00:00.0 address=0xfffffffdf8000000 flags=0x0a00] Dec 26 11:56:50 debian kernel: [ 5580.617581] usb 1-8: reset high-speed USB device number 4 using xhci_hcd Dec 26 11:57:11 debian kernel: [ 5601.195012] usb 1-8: reset high-speed USB device number 4 using xhci_hcd Dec 27 10:12:31 debian kernel: [ 1387.010011] usb 1-8: reset high-speed USB device number 4 using xhci_hcd Dec 27 10:17:38 debian kernel: [ 1693.855532] usb 1-8: reset high-speed USB device number 4 using xhci_hcd Dec 27 10:22:28 debian kernel: [ 1983.144968] INVALID_DEVICE_REQUEST device=00:00.0 address=0xfffffffdf8000000 flags=0x0a00] Seems to me that this architecture is still Beta. Reset it is not always I have now found and I need to cycle power supply off drain board and than start. |
|
![]() |
|
zlobster ![]() Groupie ![]() Joined: 02 Sep 2017 Status: Offline Points: 403 |
![]() ![]() ![]() ![]() ![]() |
1700X ZP-B1 (stock); X370 Taichi (UEFI 3.10); 16GB F4-3200C14-8GFX XMP; 256GB 960 EVO; RX 580 NITRO+ 8GB
|
|
![]() |
|
nikoff90 ![]() Newbie ![]() Joined: 27 Dec 2017 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
# dmidecode 3.0 Getting SMBIOS data from sysfs. SMBIOS 3.0.0 present. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: P3.30 Release Date: 11/10/2017 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 16384 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 5.12 |
|
![]() |
|
nikoff90 ![]() Newbie ![]() Joined: 27 Dec 2017 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
AB350M Pro 4 Freeze on reboot. Shutdown Start cycle works. Evga 1060 6gb 16 GB 2666 Muskin AMD ram Samsun 960 250GB NVMe Latest Bios 3.30 Same issue from Debian Linux and Windows 10. Board will go to reboot but once shut down just it is stuck in the pre boot zone at least that is where I think it hangs, "fans running "high than cycles down" power on", it takes a jab of the reset button to actually progress from this point holding power button down does nothing.No overclocking done. |
|
![]() |
Post Reply ![]() |
Page <123 |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |