N3700-ITX:Wake on Lan

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,I need to activate the wake on LAN on N3700-ITX Motherboard.
In the section of the ACPI BIOS Configuration I have enabled the PCIE Devices Power On as stated in the manual, but if I send a message of wakeup (via router Asus RT-AC87U), the card will not turn on.
Do you have any suggestions ?

Update....

I use Debian:
Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u5 x86_64 GNU/Linux

after i do the command:
ethtool -s eth1 wol g

I see parameter below:

Settings for eth1:
	Supported ports: [ TP MII ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Advertised pause frame use: Symmetric Receive-only
	Advertised auto-negotiation: Yes
	Link partner advertised link modes:  10baseT/Half 10baseT/Full 
	                                     100baseT/Half 100baseT/Full 
	                                     1000baseT/Full 
	Link partner advertised pause frame use: Symmetric Receive-only
	Link partner advertised auto-negotiation: Yes
	Speed: 1000Mb/s
	Duplex: Full
	Port: MII
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
	Supports Wake-on: pumbg
	Wake-on: g
	Current message level: 0x00000033 (51)
			       drv probe ifdown ifup
	Link detected: yes

NOW WAKE ON LAN IS WORKING.

Edited by iSgomm - 22 Oct 2015 at 9:39pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
iSgomm Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Oct 2015 Status: Offline Points: 7	Post Options Post Reply Quote iSgomm Report Post Thanks(0) Quote Reply Topic: N3700-ITX:Wake on Lan Posted: 22 Oct 2015 at 9:11pm
	Hi, I need to activate the wake on LAN on N3700-ITX Motherboard. In the section of the ACPI BIOS Configuration I have enabled the PCIE Devices Power On as stated in the manual, but if I send a message of wakeup (via router Asus RT-AC87U), the card will not turn on. Do you have any suggestions ? Update.... I use Debian: Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u5 x86_64 GNU/Linux after i do the command: ethtool -s eth1 wol g I see parameter below: Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup Link detected: yes NOW WAKE ON LAN IS WORKING. Edited by iSgomm - 22 Oct 2015 at 9:39pm