Asrock B650 PG usb issues |
Post Reply | Page 12> |
Author | |
edhunter
Newbie Joined: 02 Jan 2024 Status: Offline Points: 50 |
Post Options
Thanks(0)
Posted: 02 Jan 2024 at 6:04pm |
I have strange issues with intermittent loosing connectivity to all my wireless peripherals (keyboard, mouse, headset all wireless with dongles). It can happens in different situations during gaming or just browsing. It happens once or twice a day.
Here is my setup: MB: Asrock B650 PG Lightning, bios 2.02 CPU: Ryzen 7800x3d RAM: 2x16 DDR5 6000, Kingston Fury GPU: Palit rtx 4090 OS: Windows 11 (23H2) Mouse: Razer Basilisk v3 wireless (rear port usb32_3) Headset: Sony inzone h9 wireless (front port usb32_9) Keyboard: Corsair K63 wireless (front port usb_5) Second keyboard/mouse: logitech k400 (front usb_6) Strange thing is that when the issue happen logitch k400 kbd/mouse is not affected - it works. All other wireless peripherals become radio disconnected - for example the headset starts to blink indicating reconnection and sometimes it reconnects but then immediately loses connectivity again. The only solution is to do a reboot. There are related no entries in event viewer System category, but there are in Appication category informational events for LiveKernelEvent with dump for USBXHCI. So I think that the issue is probably related to usb but cannot figure it out. Recently I have added ax210 wifi/bt adapter in m2_wifi port, and may be around that time my issue started. I have disabled it in the bios (both bluetooth and wifi), but still I have these intermittent usb issues. I also have tried the wifi peripherals donlges in different ports, it does not help. I have reinstalled the chipset driver (5.11) from Asrock support site, but it did not fix my problem. Please I need advices how to proceed. This issue is very annoying especially when it happens while I play online. |
|
edhunter
Newbie Joined: 02 Jan 2024 Status: Offline Points: 50 |
Post Options
Thanks(0)
|
anyone ?
|
|
idovitz
Newbie Joined: 18 Jan 2024 Status: Offline Points: 30 |
Post Options
Thanks(0)
|
I'm experiencing the same kind of problems here. My system is b650 PG Lightning mobo + 7800x3d + rx7800xt + 32Gb expo 6000 corsair. USB 2.0 4x usually does not work. Over time, Ethernet fails and the USB connections stutter, a few minutes later the system freezes. OS is archlinux.
I plan to downgrade BIOS 2.02 to 1.30 or so. According to some, more stable. |
|
edhunter
Newbie Joined: 02 Jan 2024 Status: Offline Points: 50 |
Post Options
Thanks(0)
|
I tracked down that the issue in my case affects only usb ports connected to the b650 chipset. And it affects all HID devices connected to these ports, no matter wired or wireless.
USB ports connected to the cpu are not affected by this. I think on my case it's hardware problem and not sure if older bios would resolve it. I am going to RMA the board. I am wondering if I get again b650 or try my luck with x670. |
|
bakurix
Newbie Joined: 22 Jan 2024 Location: BR Status: Offline Points: 30 |
Post Options
Thanks(0)
|
BIOS 2.02 looks defective, I've had this issue, also, since updated my RTX 4080 only displays after reboot, the iGPU take over the first boot...
After trying to switch every other component (RTX3000 series worked fine), the solution was to come back to BIOS 1.28. |
|
bakurix
Newbie Joined: 22 Jan 2024 Location: BR Status: Offline Points: 30 |
Post Options
Thanks(0)
|
Try downgrading it to 1.28 (before beta ones), solved all my problems. As advised in download page, first XMP boot takes a while.
|
|
idovitz
Newbie Joined: 18 Jan 2024 Status: Offline Points: 30 |
Post Options
Thanks(0)
|
Thanx for replying. What problems did you experience Bakurix? I'am running 1.30.AS05 but problems did indeed not solve. Will try 1.28 soon.
|
|
Elope3
Newbie Joined: 01 Apr 2024 Status: Offline Points: 45 |
Post Options
Thanks(0)
|
Hey idovitz, I'm having very similar problems.
Sometimes when I boot my PC, the internet (connected via ethernet) doesn't work and my mouse and keyboard inputs stutter. The stuttering gets worse until the system completely freezes. A reboot always fixes the issue, allowing me to use my computer like normal. That's how I've tolerated it for this long lmao. But I don't know why it only affects some boots, and not all of them. I've suspected it's the motherboard and tried to keep it up-to-date, hoping it'd be fixed. Yesterday I updated the BIOS to 2.10, but it's too early to tell if that fixed the problem. Will try to report back if it did. Anyway,it's been two months since your latest update, idovitz. Has anything changed? Has 1.28 fixed it for you? I hope I don't have to RMA the board, because I don't wanna go through the effort of dismantling my pc ?? |
|
Cronista
Newbie Joined: 12 Apr 2024 Location: RJ-BR Status: Offline Points: 125 |
Post Options
Thanks(0)
|
I'm having the same problem. I did everything under the sun trying to figure out what even was going on (fresh windows install, PSU, RAM, defective USB device etc).
It happens as described in the posts above: Gradual decay in USB signal (mine was increasingly garbled static in the headset) then almost all USB ports get disabled, except for the 3.2 Gen 2 type A (must be the one connected to the CPU, as said by @edhunter?). Before I reinstalled windows the USB would come back by it self after about 10 seconds, but then 10 min later it would happen again. Currently, the ports just stop working until reboot. Will try downgrading to 1.28 and come back to give feedback. Setup: MOBO: B650M PG RIPTIDE CPU: RYZEN 7 7700 RAM: 2x 16gb Kingston Fury Beast RGB 6000MHz PSU: Corsair RM850x Shift GPU: RX 7900 XTX |
|
Cronista
Newbie Joined: 12 Apr 2024 Location: RJ-BR Status: Offline Points: 125 |
Post Options
Thanks(0)
|
It didn't work. I was going to test other BIOS versions but according to this other forum post about the same problem (https://forum.asrock.com/forum_posts.asp?TID=27010&PN=2&title=odd-cold-boot-issues-mobo-or-cpupound), looks like it's hardware .
Still on the other post, he said he had problems with two PG boards in a row. Plus, I've had a issue with a past Asrock AM4 build (solder would fail and not turn on the PC unless you heated up the board). So I'm going to contact the store warranty and/or Asrock support for a replacement, but this was the last Asrock board I bought or recommended. |
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |