Z170 Extreme 4 not supported - Help needed |
Post Reply | Page <12 |
Author | ||
Gearoid
Newbie Joined: 12 Feb 2017 Location: Ireland Status: Offline Points: 10 |
Post Options
Thanks(0)
|
|
Gearoid
|
||
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24518 |
Post Options
Thanks(0)
|
|
Please post your full system specs. Without knowing what drive/s and what drive types you are using it is very difficult to offer advice or give answers.
|
||
|
||
Gearoid
Newbie Joined: 12 Feb 2017 Location: Ireland Status: Offline Points: 10 |
Post Options
Thanks(0)
|
|
In BIOS I am not offered a Hard Drive as a Boot option. Is this correct, Is my hard drive in trouble, how can I check. Its only a month old
|
||
Gearoid
|
||
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
|
Check for you hard drive in the BIOS here: Advanced screen > Storage Configuration screen. Another option would be in the Tools screen, in the System Browser feature. You would click on the SATA ports on the picture of the board, and move the mouse pointer over each SATA port to see if anything is detected/connected to that SATA port. But the Storage Configuration screen would be the first place to check. Any HDD would also appear in the boot order, but if you do not find it in the Storage Configuration screen, then something is wrong. You should also find the optical drive in the Storage Configuration screen. It's possible your HDD is dead, but we don't know that yet. Checking the connections of the SATA data and power cables would be the first thing to do. If you have another SATA data cable, replace the one currently in use. Normally you can hear an HDD spinning up, any sign of activity like that? The only way to test it is to try to get it working by changing the cables, and try to listen to it spin up, and check for it in the BIOS as described above. A new HDD does not mean it will be immune from failure. Actually, a new HDD may fail after being used for a short time, less than perfect quality control does not catch a bad drive, and it will fail. About Windows 10, yes Windows 10 will not have the problem with the missing driver that Windows 7 does. Intel's new 100 (and 200) series chipsets (like your Z170) will ONLY use a USB 3.0 driver for ALL the USB ports. It's that way with any and all manufactures mother boards. |
||
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
|
<cough> neweggs method of shipping bare drives <cough> |
||
Gearoid
Newbie Joined: 12 Feb 2017 Location: Ireland Status: Offline Points: 10 |
Post Options
Thanks(0)
|
|
OK fellows you've cracked it, totally unrelated to windows 7 upgrade, it was a hard drive issue as I was beginning to suspect as it was nowhere to be seen in the BIOS. So going through it I discovered the power to the hard drive had become disconnected in the tower right about the same time as w7 upgrade so we put 2 and 2 together and got 5. Anyway the teenager is back online, house is calm again. Many thanks to all you good souls cheers from Ireland
|
||
Gearoid
|
||
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
|
Great. Thanks for coming back and letting us knows. |
||
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24518 |
Post Options
Thanks(0)
|
|
Awesome, glad to hear you are up and running
|
||
|
||
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
|
As in, throwing it in a box with some packing material on top of the drive, with nothing on the bottom? I've seen that more times than I care to remember. |
||
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |